AmericanLongRifles Forums
General discussion => Shop Made Tools => Topic started by: Bluesmoke on December 20, 2016, 03:55:28 PM
-
My friend shoots a .36 cal and was hand cutting patches.
I cut some tube and turned the bevel on the lathe and welded on the fabricated arch. Patches needed to be an inch in diameter.
Now she is able to cut strips and bangs out 20 or 30 at a time.
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fi1045.photobucket.com%2Falbums%2Fb452%2FOzwelder%2FWP_20160921_18_30_25_Smart_zpsd3b6gjep.jpg&hash=a744c8d6c432e4ad30e16948eb2a43f50dcb25ba) (http://s1045.photobucket.com/user/Ozwelder/media/WP_20160921_18_30_25_Smart_zpsd3b6gjep.jpg.html)