AmericanLongRifles Forums

General discussion => Shop Made Tools => Topic started by: runastav on January 05, 2018, 04:45:40 PM

Title: Screw bushing mill
Post by: runastav on January 05, 2018, 04:45:40 PM

Hi Guys! I am stocking a Shilo Sharps and made a simple mill from a screw head to mill for the bushing no need to harden use in drill press :)Use the drill as a controll when mill the hole.
Runar

(https://image.ibb.co/ccd54w/DSCN2016.jpg) (http://ibb.co/dXNXjw)



(https://image.ibb.co/f63uxG/DSCN2017.jpg) (http://ibb.co/ct9pWb)



(https://image.ibb.co/ha1sjw/DSCN2018.jpg) (http://ibb.co/mhwgcG)

Title: Re: Screw bushing mill
Post by: David R. Pennington on January 06, 2018, 05:29:42 AM

I made similar tool to make recessed washer for Hawken type side panel for lock screw. Made one once out of a wood screw with concave recess and a tiny pilot hole that fit over a tiny pin to make bug eyes on home made wooden fishing lures.

Title: Re: Screw bushing mill
Post by: P.W.Berkuta on January 06, 2018, 08:47:25 PM

Very creative - necessity is the mother of invention - nice work! ;)

Title: Re: Screw bushing mill
Post by: dogcreek on January 13, 2018, 12:42:56 AM

Very clever, Runar.