AmericanLongRifles Forums

General discussion => Shop Made Tools => Topic started by: xx54 on September 15, 2018, 07:21:42 PM

Title: Take a Look
Post by: xx54 on September 15, 2018, 07:21:42 PM

I built this rotary trigger guard vice a while back. It is very sturdy and rotates smoothly and will accommodate about any standard trigger guard. I brought it out of my shop into the sunlight in order to get some good pictures of it. I don’t know how I got along without it before. Hope you find this post of interest to you. Thanks for looking.
(https://preview.ibb.co/ky4NNK/F4_DDAFD7_47_AB_443_A_9_AC1_B5_A4_A297_D114.jpg) (https://ibb.co/cjFkbe)

(https://preview.ibb.co/iNPdwe/BC0_D46_A9_B740_4_C0_D_9249_F218115_D4294.jpg) (https://ibb.co/fYdSpz)

(https://preview.ibb.co/e69dwe/13_F8_D575_2706_4_E89_BF11_C0_AD7239_BE9_C.jpg) (https://ibb.co/bGOSpz)

(https://preview.ibb.co/idL7pz/8_C922707_A5_C1_439_E_9_AED_1_BDDF5822_B39.jpg) (https://ibb.co/cbgrGe)

Title: Re: Take a Look
Post by: stubshaft on September 15, 2018, 08:03:45 PM

Great idea! 

Title: Re: Take a Look
Post by: Greg Pennell on September 15, 2018, 08:15:04 PM

I like it!  Looks like a good weekend project (just got a new welder I need to practice with).

Greg

Title: Re: Take a Look
Post by: P.W.Berkuta on September 16, 2018, 12:22:05 AM

Nicely done - looks like it will accommodate many different styles. There have been similar styles shown on this forum and others in the past but I don't think any of them had the capability of rotating along the center axis as yours does.

Title: Re: Take a Look
Post by: rollingb on September 16, 2018, 04:05:07 AM

That's just pretty darn nice.  :)

Title: Re: Take a Look
Post by: oldtravler61 on September 18, 2018, 05:19:45 AM

  Dave Ease has a similar rig. Works very well. Thanks for showing. Oldtravler

Title: Re: Take a Look
Post by: Huntschool on September 21, 2018, 08:08:50 PM

Reminds me of a rotary fly tying vise.  Cool........

Title: Re: Take a Look
Post by: Angus on September 30, 2018, 07:15:50 AM

That's a nice'n.

Title: Re: Take a Look
Post by: will payne on December 15, 2018, 06:07:08 PM

Wow that looks nice and a very good looked tool.

Title: Re: Take a Look
Post by: oldtravler61 on December 25, 2018, 04:47:46 AM

  Quite similar to the one David Rase makes. Good idea. Oldtravler