AmericanLongRifles Forums

General discussion => Contemporary Accoutrements => Topic started by: River Runner on December 06, 2018, 04:13:46 AM

Title: Haversack build
Post by: River Runner on December 06, 2018, 04:13:46 AM
I really enjoy going to the Ft. Frederick market fair.  One of my best finds was a haversack that has and is  still serving me well.  One of my buddies admired it and wanted me to find one for him.  After a couple of years of searching, I finally decided to make him one and gave it to him.  He is not a living historian anymore but carries it to all our shoots and when we go to gun shows.  I thought I would share it with you. It's lined with pillow ticking and completely hand sewn.

(https://i.ibb.co/g9KHLLp/20180217-small.jpg) (https://ibb.co/LR7bXXW)
Title: Re: Haversack build
Post by: Greg Pennell on December 06, 2018, 05:57:22 AM
Very nice!  Hopefully I’ll find time to make myself one, and I hope I can do as good a job!

Greg
Title: Re: Haversack build
Post by: KC on December 06, 2018, 03:50:05 PM
That's a nice looking haversack. What are the dimensions? It looks pretty good sized.
K.C.
Title: Re: Haversack build
Post by: David R. Pennington on December 06, 2018, 05:32:48 PM
Very nice. I have an old oilskin one I will need to replace some day. What is exterior material?
Title: Re: Haversack build
Post by: River Runner on December 07, 2018, 04:15:21 AM
Thanks for the compliments.  The overall size is 13"W x 15-1/2"L.  The outer cloth material is linen.  I waterproofed it with a tin cloth recipe I found on the internet.  It worked well and darkened the cloth pretty nicely.  The strap is 1" hemp. 
Title: Re: Haversack build
Post by: River Runner on December 07, 2018, 04:17:25 AM
Oh...the leather is pigskin, I think.  The one I copied was of linen and goatskin.
Title: Re: Haversack build
Post by: Marcruger on December 08, 2018, 01:27:33 AM
Might be pigskin, but I don't see any pores.  From the look of it, I'd say it is goat.  Great leather, as it is tough as nails but supple.  God Bless,   Marc
Title: Re: Haversack build
Post by: WKevinD on December 08, 2018, 03:46:50 AM
River Runner, I believe the original maker of the haversack you picked up at Ft Fred was Harold (Bagues) a vet from NC that sews great haversacks, bags and packs.
He camps with us every year near the spot where Bill & Selinda Kennedy used to camp.

Kevin
Title: Re: Haversack build
Post by: River Runner on December 08, 2018, 05:56:56 AM
burnt,

I don't believe I know any of those folks, but I would like to meet my fellow North Carolinian.  Here is a photo of the haversack I purchased at Ft. Frederick in 2008 or 2009. 


(https://i.ibb.co/rZ6d6vt/001-small.jpg) (https://ibb.co/0fMsMQX)
Title: Re: Haversack build
Post by: Marcruger on December 09, 2018, 09:54:11 PM
I think I like the one you made better than the original one you purchased.  :-)  God Bless,   Marc
Title: Re: Haversack build
Post by: AsMs on December 10, 2018, 03:08:27 AM
I second that Marc!
Title: Re: Haversack build
Post by: Hungry Horse on December 10, 2018, 11:32:36 PM
I see the linen one has a bottom seam. I think this is not something likely to be seen in early times. A seam is always going to be a weak spot, for one thing, and unless they just happened to have small pieces of linen, why make a seam where you didn’t have to. Same goes for shooting bags. The old shooting bags I’ve seen rarely had a bottom seam, even when they had gusseted sides.

  Hungry Horse
Title: Re: Haversack build
Post by: River Runner on December 11, 2018, 04:38:08 AM
The backside of both haversacks are of leather which runs up and folds over to make the front flap.  The tan haversack has a pillow ticking inner liner.  The front linen piece is hemmed over and captures the ticking.  The stitch is of waxed thread run with two needles in and out.  This stitch passes through the leather, the two panels of ticking and the two panels of the linen (front face and the hem), if all that makes sense.  This is true on both sides of the haversack.  When you pull that all together, it is very strong.  It's not going to pull apart, trust me.  There are many ways to make a haversack.  This is just one style variant.  Whether or not it can be documented historically, I don't know.