AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: AMartin on September 13, 2019, 06:07:20 PM
-
The other day , getting ready to file another pair of sight for the rifle I'm building , I thought hey .. I tired of trying to hold onto the front sight without smashing and leaving vise marks ...
I know you can buy a holding jig from Knob mt. but I didn't like the screws idea ...
So I took a stick of hard maple and made a (clothes pin) then filed a dovetail into the top and when squished into the vise jaws there is zero slippage ...
Thought I would share ..
Allen
(https://i.ibb.co/vvBJkjQ/P1050191.jpg) (https://ibb.co/bR3rXK2)
(https://i.ibb.co/XC6QqdN/P1050192.jpg) (https://ibb.co/vjfFSrg)
(https://i.ibb.co/nnjyyL8/P1050193.jpg) (https://ibb.co/9VW00r3)
-
Thank Allen nifty little sight clamp.
-
I’m heading to the shop to make one of those right now...
Thanks!
-
Cool idea Allen.
-
Thanks for the idea, Allen.
Bob
-
Great idea!! simpel and effectiv.
Best regards
Rolf
-
Wonderful device, Allen.
-
I always suspected you were brilliant. Now I know for sure
Don
-
Great adaptation. I'll be making one of those for sure.
-
Hi,
Thank you for sharing that Allen. I made two today, one for sights and a larger one for wooden patchbox lids.
dave
-
Great idea. Simple but effective for a "hard to hold" part.
-
Now that is just plain slick. One of those forehead-smacking, why-didn’t-I-think-of-that moments...
Greg
-
I love handy tricks like this. Well done!
-
That's a pretty cool idea you came up with!
-
You had better patent this. Hate to see it be like the wheel barrow and be centuries later for it to be taken by someone who wants to charge a premium for this to us all.
Mike
-
Awesome simplicity! I love it. Great idea.
Curtis
-
Great idea, always fun to make a tool
-
Way Kool!
Tim
-
make the same thing out of metal, then you can solder in it for sight modifications.
kw
-
Awesome simplicity! I love it. Great idea.
Curtis
I bet you could cut and file one out of a rail road spike. ;D
-
Never would have thought wood would hold something that small in tiny dovetails. I'll have to make one now.
-
Ha ha!! Totally agree with others that is an awesome & simple solution to a real PITA operation!
Bruce
-
Nice!!! Thanks, Allen
Ed