Author Topic: .58 cal patch/ball  (Read 3149 times)

Offline varsity07840

  • Sr. Member
  • ****
  • Posts: 305
.58 cal patch/ball
« on: October 12, 2010, 03:09:42 PM »
I recently acquired a .58 cal barrel with the following specs.
.580 bore
.012 groove depth
8 wide grooves/narrow lands-similar to Forsythe
1/70 twist.

Ordinarily my load recipe would include a .570 ball and .018 patch, at least for starters, but I'm thinking the very narrow lands/wide grooves, .012 depth may
require a bigger ball(.575?) and/or a thicker patch.

Comments will be appreciated.

Duane

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7610
Re: .58 cal patch/ball
« Reply #1 on: October 13, 2010, 03:41:44 AM »
That sounds like the two GM 58's that I made, 570 worked great in them, 110 gr. 2f and maybe alittle thicker patch.    Gary

Harnic

  • Guest
Re: .58 cal patch/ball
« Reply #2 on: October 13, 2010, 04:22:31 AM »
My choice would be the .575" ball too Duane.

Daryl

  • Guest
Re: .58 cal patch/ball
« Reply #3 on: October 13, 2010, 05:30:51 PM »
Yes - I'd use a .575" with a 10oz denim patch or ticking- either .020" top .022" thick.