Author Topic: Mould Cherry  (Read 22260 times)

Offline Captchee

  • Hero Member
  • *****
  • Posts: 768
Re: Mould Cherry
« Reply #25 on: February 13, 2012, 05:29:54 PM »
james .
 
 i have a  original Stutzer rifle that shoots a cloth patched conical .  i was thinking maybe your tear dropped cherry may have been  an attempt  to make such a conical

Offline D. Keith Lisle

  • Hero Member
  • *****
  • Posts: 1226
    • Custom Muzzleloaders
Re: Mould Cherry
« Reply #26 on: March 12, 2012, 04:50:58 PM »
Here are some hand made cherries made by a passed gunsmith of Louisville, KY.  (Norton Gatz)  One of the small ones is a massed produced cherry, (maybe used for a pattern ?), the others hand filed & hardened. Most cut the same direction. Possibly easier for him to file them that direction ?



Still digging thru little boxes of stuff.  These were in with a box full of rifling heads that  is for the rifling machine he had. Various sized cherries & the double one of .340 cal one end, .400 on the other end, I thought was unique.  All were made from round stock.  Have not found any molds yet, possibly he made a mold for the barrels as he finished them & the mold went with the barrel/rifle.

Keith Lisle












g
« Last Edit: March 12, 2012, 04:58:06 PM by D. Keith Lisle »

Offline KNeilson

  • Sr. Member
  • ****
  • Posts: 330
Re: Mould Cherry
« Reply #27 on: March 14, 2012, 03:50:49 AM »
Quote
Possibly easier for him to file them that direction ?
I dont know if one direction is easier than the other in regards to filing the teeth , Ive filed mine to cut "right hand" so they can be used in a drill press, lathe or with a hand brace driven in a r/h (clockwise)direction. Most rotary cutting tools seem to be like this, I`m thinking originally cause the world has more rightys than leftys...I would say this fellow did the same..with the shanks designed to mount in a rotary chuck..          regards..       Kerry