Author Topic: Arkebuz -1525 -proces - Rekonstrukcja (Read 16285 times)

Acer Saccharum · « **Reply #1 on:** June 28, 2012, 01:24:39 AM »

This the pan plate on the side of an Arquebus bbl for the little swinging cover to screw to. The touchhole has to get drilled eventually, plus a pan recess gets milled/drilled/chiseled.

I think that's what this is, anyway. Great work, Rasz.

dannybb55 · « **Reply #2 on:** June 28, 2012, 04:22:21 AM »

This is the same way that pans were joined to barrels on Spanish Matchlocks. The chisel work is well illustrated in Practical Blacksmithing. by M T Richardson.
Nice Bolek,
Danny

raszpla · « **Reply #3 on:** June 28, 2012, 07:54:13 PM »

axelp · « **Reply #4 on:** June 28, 2012, 08:24:11 PM »

outstanding

TPH · « **Reply #5 on:** June 29, 2012, 06:04:30 PM »

raszpla · « **Reply #6 on:** June 29, 2012, 07:51:19 PM »

Glenn · « **Reply #7 on:** June 30, 2012, 05:16:47 PM »

Once again ... EXCELLENT WORK !!!

raszpla · « **Reply #8 on:** June 30, 2012, 07:06:06 PM »

thank you

whitebear · « **Reply #9 on:** June 30, 2012, 08:24:42 PM »

I don't know much about the Arkebuz but is that a hole in the bottom of the pan? Does it go all the way through? Why is there a hole in the bottom of the pan?

raszpla · « **Reply #10 on:** June 30, 2012, 09:03:52 PM »

raszpla · « **Reply #11 on:** July 06, 2012, 09:07:40 PM »

raszpla · « **Reply #12 on:** July 07, 2012, 01:25:35 PM »

dannybb55 · « **Reply #13 on:** July 07, 2012, 09:14:06 PM »

Can anybody guess where the trigger is on this snaplock?

raszpla · « **Reply #14 on:** July 07, 2012, 10:22:35 PM »

smart dog · « **Reply #15 on:** July 07, 2012, 10:44:16 PM »

Hi,
Very nice Raszpla. I like the early snapping matchlocks. Thanks for showing how to dovetail the pan. I will be doing that on a future project. I like button operated snapping matchlocks and I think they were still popular for target guns long after the matchlock was obsolete. I believe japanese matchlocks are also button operated.

dave

volatpluvia · « **Reply #16 on:** July 08, 2012, 02:05:40 AM »

show us the inside of the 'lock', please.

dogcreek · « **Reply #17 on:** July 08, 2012, 02:30:51 AM »

Very interesting, Raszpla! Thanks for the photos.

raszpla · « **Reply #18 on:** July 08, 2012, 11:09:41 AM »

dannybb55 · « **Reply #19 on:** July 08, 2012, 05:05:15 PM »

I love it, There is no inside of the lock, only external parts. Elegant and simple. The slide lock on the Serpentine must have been a delicate weld to take, like making chain out of heavy wire. The pay-off is that the gunner will never lose it.
What wood did you use for the stock Bolek?
Danny

News:

Author Topic: Arkebuz -1525 -proces - Rekonstrukcja (Read 16285 times)

raszpla

dannybb55

raszpla

raszpla

raszpla

raszpla

raszpla

raszpla

dannybb55

raszpla

raszpla

dannybb55