« previous next »
Pages: [1]   Go Down

Author Topic: Golden Mean  (Read 8470 times)

long carabine

  • Guest
Golden Mean
« on: January 24, 2009, 03:26:42 AM »
 I have read about the Golden Mean but I still do not understand it in relation to building a ML. Could someone please explain it in detail? I am understanding it is the relationship to perfect measurements ie... eyes to nose, ears to nose nose to mouth ect, ect. Proportions perfect. How does this relate to rifle building and how is it applied? Thanks, Tim
Logged

Online smallpatch

  • Hero Member
  • *****
  • Posts: 4102
  • Dane Lund
Re: Golden Mean
« Reply #1 on: January 24, 2009, 03:32:13 AM »
Tim,

That is a subject that NO ONE can cover in one blurb. Books have been written about it.

Basically, it is a relationship of 3:5.

It applies in building in numerous ways.  Example (Patch box, 3:5 with buttstock,)

No one is sure if it was truly applied by original builders, or if it is an "eye" thing.

MBS has a booklet that explains it simply, and with illustrations.  Interesting concepts.  I've applied in my own designs, it does work.
Logged
In His grip,

Dane

famouseagle

  • Guest
Re: Golden Mean
« Reply #2 on: January 24, 2009, 03:38:31 AM »
This subject was covered last Fall ad naseum (9 pages).  I don't think there's much to add.  Check the archives.
Logged

Marty

  • Guest
Re: Golden Mean
« Reply #3 on: January 24, 2009, 04:40:41 AM »
BAAAAH HAAAA, i am putting on my asbestos underwear before the flaming begins!!! hee hee

You have stumbled on to something that i believe is correct (golden Mean), but there are many very good contemporary builders that do not share that belief.

I will PM you if you would like to hear more.
Logged

Offline Dave B

  • Hero Member
  • *****
  • Posts: 3133
Re: Golden Mean
« Reply #4 on: January 24, 2009, 08:29:29 AM »
I think in a nut shell you could say that there are some who feel that it is an artistic tool that can be used in portions of the design and layout for a longrifle. There have been several articles and one booklet written that show how it can be applied to particular schools of gun making. The NMLRA Journal of Historical Arms making Technology series has one article that discusses the proportion. As mentioned earlier there is a good discussion in the archives about the subject. It was one of the most read discussions from the old web site.
Logged
Dave Blaisdell

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Golden Mean
« Reply #5 on: January 24, 2009, 11:25:18 AM »
OH. NO not this again. Leave me out.
Logged
Nobody is always correct, Not even me.

Offline Longshot

  • Sr. Member
  • ****
  • Posts: 324
Re: Golden Mean
« Reply #6 on: January 24, 2009, 03:18:20 PM »
Proportional balance=visual correctness.  Amen
Logged

Seven

  • Guest
Re: Golden Mean
« Reply #7 on: January 24, 2009, 03:22:01 PM »
Here is a link to Hoot Al's shop.  He describes how he uses the golden mean in gun building.  http://www.hootalrifleshop.org/golden_mean.htm
Logged

long carabine

  • Guest
Re: Golden Mean
« Reply #8 on: January 24, 2009, 04:08:27 PM »
 I was told it is a measurement for everything, a measurement for perfection. Tim
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18316
  • AKA TimBuckII
Re: Golden Mean
« Reply #9 on: January 24, 2009, 05:06:04 PM »
 Ahhhhh, Perfection, something that we are all searching for. I for one do not think it can be found in a pair of crossed sticks.

Tim C.

 The devil made me do it ;D
« Last Edit: January 24, 2009, 06:17:32 PM by Tim Crosby »
Logged

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9888
  • Kill a Commie for your Mommy
Re: Golden Mean
« Reply #10 on: January 24, 2009, 05:30:12 PM »
Best to look to the archives
I see further discussion as pointless :P
Its like religion, you either believe it or you don't.

Dan
Logged
He who dares not offend cannot be honest. Thomas Paine

Offline Jim Filipski

  • Hero Member
  • *****
  • Posts: 642
    • Jim W. Filipski Flintlocks
Re: Golden Mean
« Reply #11 on: January 24, 2009, 05:54:51 PM »
Start out with your workshop bench being the "5" and your piece of stockwood being the "3"
after that it all comes naturally
 ::)
Logged
" Associate with men of good quality,  if you esteem your own reputation:
for it is better to be alone than in bad company. "      -   George Washington

"A brush of the hand
of Providence is behind what is done with good heart."

Offline Acer Saccharum

  • Administrator
  • Hero Member
  • *
  • Posts: 19311
    • Thomas A Curran
Re: Golden Mean
« Reply #12 on: January 24, 2009, 06:43:35 PM »
;D :D ;) >:( ::) :'( ;D :D :o ;D ::) :P ;D :D ;)

Here's the topic: http://americanlongrifles.org/forum/index.php?topic=1597.0

This subject will come up again and again over time; it is very controversial, makes for good conversation,  folks get all heated up over it, but for all that, it comes down to whether you choose to use it or not. Makes good reading anyway.

Acer
« Last Edit: January 24, 2009, 06:51:18 PM by Acer Saccharum »
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline Paddlefoot

  • Hero Member
  • *****
  • Posts: 1844
Re: Golden Mean
« Reply #13 on: January 24, 2009, 09:30:36 PM »
Man this is the best tapdancing I have seen in a long time! I guess we sorta beat this subject to death. ::)
Logged
The nation that makes great distinction between it's warriors and it's scholars will have it's thinking done by cowards and it's fighting done by fools. King Leonidas of Sparta

Offline Benedict

  • Sr. Member
  • ****
  • Posts: 261
Re: Golden Mean
« Reply #14 on: January 24, 2009, 11:12:07 PM »
Would it a good thing to  put in the Tutorials so we can point to there when it comes up again?

Bruce
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4311
  • If we need it here, make it here. Charlie Daniels
Re: Golden Mean
« Reply #15 on: January 25, 2009, 12:43:05 AM »
All I have to say about this topic is "The eye don't lie".
DMR
Logged

Offline Stophel

  • Hero Member
  • *****
  • Posts: 4532
  • Chris Immel
Re: Golden Mean
« Reply #16 on: January 25, 2009, 08:51:11 PM »
AAAAAAAAAAAAGH!!!!!!!!
Logged
When a reenactor says "They didn't write everything down"   what that really means is: "I'm too lazy to look for documentation."

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Golden Mean
« Reply #17 on: January 25, 2009, 09:21:22 PM »
The trouble lies in the fact that everybody's opinion of perfect is different. It also changes with age.
Logged
Nobody is always correct, Not even me.

northwoodsdave

  • Guest
Re: Golden Mean
« Reply #18 on: January 25, 2009, 11:11:55 PM »
I use the golden mean because I am a good technician, but not a great artist.  It's a pretty straightforward way to acheive a nice balance that is pleasing to the eye.  And it is easy for us "non-artsy" types to utilize.

David L

 
Logged

Offline Metalshaper

  • Hero Member
  • *****
  • Posts: 610
Re: Golden Mean
« Reply #19 on: January 26, 2009, 03:35:23 AM »
Golden Mean??

I just use the T.L.A.R. system!!  Yep, " That Looks About Right!!"  :D

Respect Always
Metalshaper
Logged
Pages: [1]   Go Up
« previous next »