Author Topic: My Rifling Bench (Read 34512 times)

runastav · « **Reply #50 on:** August 25, 2016, 07:04:46 PM »

Hi Guys!
Steve we like to but you know :-[Ok, now we rifle my Norwegian Style Box Barrel cal 50. 44" long made by Charles Burton. Rolf is gone home, so this time I use my sub-teenager buddy Bjørn as the worker(JAN) We use 15 papershims and Bjørn travel 1652 times in ca 3 hours ;)The barrel turn out wery nice we think see last photo
Runar
Rolf and mine barrel

Box Barrel ready for rifling

Sub-Teenager Bjørn in work

Almost done

Me cheking, hmm wery nice

Bjørn, oaahoo

Nice ha!

Jeger Justnes · « **Reply #51 on:** August 26, 2016, 08:33:12 PM »

Sweet as candy, old Rusty :-)

Angus · « **Reply #52 on:** August 26, 2016, 09:38:56 PM »

Runar,
Very nice rifling. Your worker is production ready. Let us know when you are taking orders.

Steve Bookout · « **Reply #53 on:** September 01, 2016, 03:44:58 PM »

Hei Runar!
It's a pleasure to see you and your cohorts use that rifling bench and use it so well. Such precision work with wooden tooling speaks volumes about your craftsmanship and serves as an inspiration for other builders. I do enjoy the series of photos because it's like reading a good book--you look forward to reading the next chapter. Mvh

krutnarr · « **Reply #54 on:** September 28, 2016, 01:17:02 AM »

Hei.
Snakker vi kassepipebygging nå?
Det er jo ei av drømmebøssene hos undertegnede :-)

runastav · « **Reply #55 on:** September 28, 2016, 11:36:51 AM »

Hi all! And thank you Bookie and krutnarr
Yes it will be a flintlock boxbarrel gun, but just now I have fun with my # 2 Starr revolver, rolling block pistols etc

Runar

runastav · « **Reply #56 on:** March 30, 2018, 03:27:34 PM »

Hi All!
Me and Rolf the doc rifle his Charles Burton cal 50- 30" long, IIIcecold in my garage me freesing but Sub-teenager Rolf dont

20 papershims and 1547 travels. Rifling turnes out good! See the small red eggboilingclock on Rolfs left side we use as a Counter tahnk you Bookie

Runar

Bob Roller · « **Reply #57 on:** March 31, 2018, 03:46:41 PM »

Fine job.You and I both make chips and shavings with the barrel or lock
being a by product.That milling operation looks very fragile to me.The long
and unsupported shank of the end mill looks like a problem ready to happen.
Anyhow,keep on posting what you are doing.

Bob Roller

n stephenson · « **Reply #58 on:** March 31, 2018, 04:23:38 PM »

Runar, every time you get a new "sub- teenager" he looks older

. Really good post !! You always have neat things to post! Good Work!!! Nate

Angus · « **Reply #59 on:** March 31, 2018, 04:46:36 PM »

Outstanding!!! Runar, Rolf and Bjorn, you have achieved another level of success.
This is a familiar scene that recently happen at Bookie's shop too. Tim and Jeff blew in from the northern snow range of Wisconsin for Jeff's first taste of rifling.

Pukka Bundook · « **Reply #60 on:** March 31, 2018, 05:09:49 PM »

Very good work and a grand rifling set-up Runar!

I had never seen this tread until today.

All the best,
Richard.

runastav · « **Reply #61 on:** April 01, 2018, 11:43:26 AM »

Hi and thank you all!Angus, give Greetings to Bookie from me

Runar

Iktomi · « **Reply #62 on:** April 04, 2018, 05:15:40 AM »

Those barrels look great Runastav. I find this fascinating, being able to actually make and rifle a gun barrel with a relatively low tech manually operated tool. It's actually something that I think I would enjoy doing. Like I don't have enough things to waste time on already

tim crowe · « **Reply #63 on:** April 08, 2018, 11:54:36 PM »

Runar,
Now Bookie is going to want to rifle more barrels!
Tim

runastav · « **Reply #64 on:** October 30, 2018, 02:16:39 PM »

Hi Guys, and thank you Iktomi and tim Crowe! So we rifled nr 10 this time I motivated my yongest teenager son Martin(Øhh he is 31) to be my helper. Normaly his interests is football etc! The barrel is 45" long cal 50 made by Charles Burton and is light swamped. I will use the barrel for a Gillespie Rifle.We use 18 papershims, and Martin travel ca 1500 times forword and backwards!
Runar

ammonium sulphide formula

mind without fear by rabindranath tagore

rich pierce · « **Reply #65 on:** October 30, 2018, 02:47:01 PM »

That looks great! The grooves look wide, which I like. What is the tooth count on your cutter? (Teeth per inch or centimeter). It looks very aggressive, but results look great.

runastav · « **Reply #66 on:** November 02, 2018, 02:46:05 PM »

Thank you Rich Pierce! The cutter is 1-1/4" long 8 teeth. The cutter base is 2,5mm wide which I like

Runar

Pukka Bundook · « **Reply #67 on:** November 02, 2018, 04:12:11 PM »

Lovely work, Runar!

I made my cutter from an old file, and for some reason rounded the tooth a little on the non-cutting side.
Also rounded the actual cutting section, but that is just another style.

Runar,
I have seen guides made of steel ribbon in Scandinavia. Have you seen these or used this type? The steel bar is twisted to for the rifling pitch, and must be re-indexed for each cut.

Best wishes
Richard.

Daryl · « **Reply #68 on:** November 02, 2018, 06:54:07 PM »

I've seen pictures of a twisted square bar rifling guide somewhere as well, Richard.

runastav · « **Reply #69 on:** June 25, 2023, 10:08:47 PM »

Hi all!
Barrel #12 . I use my yongest son Martin as a driver, original barrel 35" - octagon 10" rest round cal 14mm(55?)over the lands this will be a trading barrel with a Swedish friend (83)

Runar

Rolf · « **Reply #70 on:** June 26, 2023, 12:31:55 AM »

Flott løp Runar, got å se benken i bruk. Holder fortsatt på med de seks Alex Henry låsene. Snart ferdig med kapitelet om fluene. Når jeg er ferdig med låsene, skal jeg begynne på igjen med postførervergene, har to som er nesten halvveis, men jeg sliter med å få avtrekkerne til å returnere.

Mvh
Rolf

Angus · « **Reply #71 on:** June 26, 2023, 01:45:59 AM »

Runar,

Well done, should be a great shooter!

News:

Author Topic: My Rifling Bench (Read 34512 times)

Jeger Justnes

n stephenson

Iktomi