Author Topic: Take Down Kentucky Rifle  (Read 5295 times)

Offline Majorjoel

  • Hero Member
  • *****
  • Posts: 3134
Take Down Kentucky Rifle
« on: July 29, 2014, 07:25:42 PM »
 I have seen pictures of several American longrifles that feature take down stock\barrels and have always been curious about the mechanical details. Here are a couple of photo's of a Samuel Morrison rifle with this feature. Curiosity now satisfied!        
« Last Edit: July 29, 2014, 07:27:33 PM by Majorjoel »
Joel Hall

Offline Robert Wolfe

  • Hero Member
  • *****
  • Posts: 1268
  • Great X Grandpa
Re: Take Down Kentucky Rifle
« Reply #1 on: July 29, 2014, 07:35:02 PM »
Very slick. Thanks for posting.
Robert Wolfe
Northern Indiana

Offline Shreckmeister

  • Hero Member
  • *****
  • Posts: 3749
  • GGGG Grandpa Schrecengost Gunsmith/Miller
Re: Take Down Kentucky Rifle
« Reply #2 on: July 29, 2014, 08:06:31 PM »
I saw those pictures somewhere before and was impressed with the engineering of it.
Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law' because law is often but the tyrant's will, and always so when it violates the rights of the individual.

Offline alyce-james

  • Hero Member
  • *****
  • Posts: 908
Re: Take Down Kentucky Rifle
« Reply #3 on: July 29, 2014, 09:31:04 PM »
Majorjoel: Sir, Thanks for posting. Great to share this rare find with this site. AJ.
"Candy is Dandy but Liquor is Quicker". by Poet Ogden Nash 1931.

Offline Buck

  • Hero Member
  • *****
  • Posts: 899
  • A.F.A.M. # 934, Trinity Commandry #80
Re: Take Down Kentucky Rifle
« Reply #4 on: July 30, 2014, 12:25:59 AM »
Its what we call a keyed joint in the trades. Beautiful Rifle.
Buck

Offline WKevinD

  • Hero Member
  • *****
  • Posts: 1357
Re: Take Down Kentucky Rifle
« Reply #5 on: July 30, 2014, 01:18:00 AM »
Like that allot. That looks like a very frustrating/satisfying build.
PEACE is that glorious moment in history when everyone stands around reloading.  Thomas Jefferson

Offline GrampaJack

  • Sr. Member
  • ****
  • Posts: 345
Re: Take Down Kentucky Rifle
« Reply #6 on: July 30, 2014, 01:41:26 AM »
That is impressive. I guess you could also call it a "double taper wedge joint with a half gainer".  I'll bet even the CNC guys would be impressed. Thanks for posting. Jack
« Last Edit: July 30, 2014, 01:42:58 AM by GrampaJack »

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2393
  • USAF vet 1971-1972 malmstrom afb,montana
Re: Take Down Kentucky Rifle
« Reply #7 on: July 30, 2014, 01:49:26 AM »
Nice pics,I have built 2 of these longrifles,both in percussion.I had no pic like this,I just made my end joint out of flat brass,worked into stock during build.I really like the lineup of this.Mine are tight once the pin or key and tang screw go in,so I 'm good,this would be the icing on the cake.Maybe next one?It should be a flinter.Thanks for the pics.Dave :)

Offline Buck

  • Hero Member
  • *****
  • Posts: 899
  • A.F.A.M. # 934, Trinity Commandry #80
Re: Take Down Kentucky Rifle
« Reply #8 on: July 30, 2014, 03:50:02 AM »
I guess you could call it a dove tail or the THE KEYSTONE.
Buck


Offline iloco

  • Hero Member
  • *****
  • Posts: 1029
  • Old Timer, Chilhowie, Va.
iloco

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2184
  • Missouri
Re: Take Down Kentucky Rifle
« Reply #11 on: July 30, 2014, 05:55:16 AM »
Link worked fine for me.  Nice rifle!

Curtis
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing