Author Topic: drill jig for pins etc.  (Read 4047 times)

inlikeflint

  • Guest
drill jig for pins etc.
« on: January 24, 2015, 07:47:43 AM »
I saw the plans to make the jig for the drill press to drill between 2 points.  I just happened to have a min lathe and a micro mill.  The t-nuts on mill are 1/4 20.  chucked up 3 inches of 1/4 20 threaded rod and put a point on it.  One nut, one washer, and thread into t-nut on mill and I got my jig.   Spent more time thinking about how I would be able to get one lined up on the drill press perfectly.  Put a hole from tang to trigger guard. Total time including building jig was less than 4 or 5 min.  john