Author Topic: bird mouth round ball bullet dispenser.....ever see one??? (Read 15387 times)

sonny · « **on:** July 19, 2016, 07:07:55 PM »

I have been messing with a small horn trying to make a bird head round ball bullet dispenser. I have the birds head with beak open an the balls make it to the beak tip, but cannot imaging how to stop all the rest of the balls in horn reservoir to stop crowding the beak tip when tipping the head down to advance a ball forward............anybody ever mess with something like this..........sonny

Tim Crosby · « **Reply #1 on:** July 19, 2016, 08:43:23 PM »

I may be missing something, as I see it pull out the stopper, roll a ball out put the stopper back in. A picture may help.

Tim C.

Top Jaw · « **Reply #2 on:** July 20, 2016, 02:17:19 AM »

I agree with Tim. Your bird will need a stopper in his mouth.

Ky-Flinter · « **Reply #3 on:** July 20, 2016, 05:22:57 AM »

I saw one where the top and bottom of the bird's beak just barely retained the ball, but they flexed enough to allow the ball to be pulled out with your fingers, and the beak retained the next ball in line.

-Ron

Ky-Flinter · « **Reply #4 on:** July 20, 2016, 05:26:58 AM »

I did a search and found this under "duck bill ball bag". Cool, huh?

-Ron

skillman · « **Reply #5 on:** July 21, 2016, 04:03:47 AM »

That's what I was thinking of. Thanks for finding it Ron.

Steve

Larry Pletcher · « **Reply #6 on:** July 30, 2016, 06:56:18 PM »

I made a couple of these for different ball sizes. Most are made to hang around your neck. For large caliber guns they can be heavy and cumbersome. The first one was one with a flat "powder horn type" butt that sat on a loading bench. It was made for a .395 ball. The one in the photo was for a .45, I think.

Regards,
Pletch

EricEwing · « **Reply #7 on:** August 01, 2016, 04:11:30 AM »

There was one at Dixon's this weekend, won several well deserved awards, intricately made and in the form of a crow's head, with a (pivoting?) Pennsylvania keystone state shaped plate on the bottom.

Hungry Horse · « **Reply #8 on:** August 02, 2016, 08:55:09 PM »

It seems to me this contraption would be like having a maroca tied to your tail. How would you keep it from rattling all the time?

Hungry Horse

sonny · « **Reply #9 on:** August 24, 2016, 05:32:34 AM »

Well, if you never saw a crow bullet horn............now ya see one.......Finished it just in time for dixons fair an won a couple blue ribbons with the crazy idea..........what do ya think ?..........https://1drv.ms/f/s!ApU7lXlu8V7Eh3hbZKIHvtqYAdT0............sonny

sonny · « **Reply #10 on:** August 24, 2016, 05:39:25 AM »

When the bird is nosed down, one bullet advances (like he's eating a cherry which stays in his beak ). Its really not very noisy, as the round balls in the base can pivot with the moving motion by the rope attachment..........Hope you can see the pictures.......I really never put pictures into my messages before!!!!............sonny

D. Taylor Sapergia · « **Reply #11 on:** August 24, 2016, 08:23:33 AM »

I think your raven beak carving is excellent, but your photography is lousy!

sonny · « **Reply #12 on:** August 25, 2016, 12:42:00 AM »

flip phone camera.........hummmmm...............how can I send digital camera pictures to my messages???..............sonny

bones92 · « **Reply #13 on:** August 25, 2016, 01:24:15 AM »

How about putting in a little curved piece of spring steel, a "tongue" so to speak... that stops the ball from falling out, and you just grab it with two fingers and slip it past the spring?

D. Taylor Sapergia · « **Reply #14 on:** August 25, 2016, 04:06:28 AM »

Sonny: there's a tutorial for posting pictures with your post.

RoaringBull · « **Reply #15 on:** August 25, 2016, 06:13:28 PM »

Here you are sir...

Rick Sheets · « **Reply #16 on:** August 25, 2016, 09:15:35 PM »

Quote

Well, if you never saw a crow bullet horn............now ya see one.......Finished it just in time for dixons fair an won a couple blue ribbons with the crazy idea..........what do ya think ?..........https://1drv.ms/f/s!ApU7lXlu8V7Eh3hbZKIHvtqYAdT0............sonny

Sonny,

We got some professional pictures done at Dixon's of your crow's head. With your permission, I will post them here. Also, PM me your preferred email address and I will get the set to you.

Rick

sonny · « **Reply #17 on:** August 26, 2016, 02:28:27 AM »

thanks Rick, I appreciate your help........thanks/sonny

bones92 · « **Reply #18 on:** August 26, 2016, 06:57:26 PM »

Spotted Bull, that is really awesome.

I could imagine a variation where the lower jaw was separate and could be opened by pushing on a tab on the throat, and it would close itself (using a flat spring perhaps).

RoaringBull · « **Reply #19 on:** August 26, 2016, 11:01:39 PM »

Not mine, that's Sonny's. I was just posting the pictures for him.

sonny · « **Reply #20 on:** August 28, 2016, 09:18:27 PM »

Rick, Please if you have some clear shots of the crow post them for my friends to see them......thanks/you most certainly have my permission to show them..............terry/sonny

Rick Sheets · « **Reply #21 on:** September 03, 2016, 08:43:58 PM »

Photos courtesy of Lappegard Photography

bones92 · « **Reply #22 on:** September 03, 2016, 09:41:41 PM »

That is awesome.

skillman · « **Reply #23 on:** September 04, 2016, 02:59:47 AM »

My Pam and I are blown away! Rick, tell your Pam those are great pictures!

Steve

Squirrel pizza · « **Reply #24 on:** September 10, 2016, 07:08:01 PM »

Thats the neatest thing I've seen in a long time. I don't know how practical it is but it sure is cool! Excellent craftsmanship. I guess the wire loop through his neck pushes the spring in its bottom bill?

News:

Author Topic: bird mouth round ball bullet dispenser.....ever see one??? (Read 15387 times)

RoaringBull

RoaringBull