Author Topic: Bil Large Barrel Roller Lock and Triggers Sold pending payment  (Read 1029 times)

Offline P.Bigham

  • Full Member
  • ***
  • Posts: 241
Bill Large Barrel .50 cal. #177. Snail breech percussion 30inch length tapered .970 t0 .860.Barrel and tang Inletted in curly maple 1/2 stock. Iron Butt plate Inletted.  Barrel and tang Inletted screwed in from top and bottom 2 barrel keys done. Black horn nose cap done. Bob Roller Shuzten style cap lock and Roller set set triggers marked Roller 81. Shaped from comb back. All work was done by Bruce Le Page. Ramrod hole not drilled. New condtion will post photos soon as I get some help. Shipped lower 48 $ 850.00







« Last Edit: May 24, 2017, 02:37:01 PM by P.Bigham »
" not all who wander are lost"

Offline rtp

  • Starting Member
  • *
  • Posts: 32
Re: Bil Large Barrel Roller Lock and Triggers
« Reply #1 on: May 20, 2017, 04:35:06 PM »
Hello. Please consider me first in line.  Would you sends pics please?
Roger Perry

Offline P.Bigham

  • Full Member
  • ***
  • Posts: 241
Re: Bil Large Barrel Roller Lock and Triggers
« Reply #2 on: May 21, 2017, 04:24:31 AM »
RTP  PM sent
" not all who wander are lost"

Offline Roger B

  • Hero Member
  • *****
  • Posts: 1179
  • You wouldn't have a snack, would you?
Re: Bil Large Barrel Roller Lock and Triggers
« Reply #3 on: May 21, 2017, 05:03:46 PM »
If that Roger doesn't take it then this one will!
Roger B.
Never underestimate the sheer destructive power of a minimally skilled, but highly motivated man with tools.

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 3887
Re: Bil Large Barrel Roller Lock and Triggers
« Reply #4 on: May 21, 2017, 11:23:49 PM »
Hello. Please consider me first in line.  Would you sends pics please?
Roger Perry

Very few of these locks were sold here in the USA that were made by me.
I donated one and a much fancier set of triggers to the Schuetzen match
at Friendship in 1987 and it was not acknowledged and the lock was later
found in a flea market minus the hammer and the triggers disappeared altogether.

Bob Roller

Offline P.Bigham

  • Full Member
  • ***
  • Posts: 241
Re: Bil Large Barrel Roller Lock and Triggers
« Reply #5 on: May 22, 2017, 04:39:02 AM »
Roger B  pm sent
" not all who wander are lost"

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 3887
Re: Bil Large Barrel Roller Lock and Triggers
« Reply #6 on: May 22, 2017, 03:06:21 PM »





That screw holding the two springs in the trigger is not the one it came with.

Bob Roller
« Last Edit: May 22, 2017, 03:26:57 PM by Ky-Flinter »

Offline P.Bigham

  • Full Member
  • ***
  • Posts: 241
Re: Bil Large Barrel Roller Lock and Triggers
« Reply #7 on: May 24, 2017, 01:02:21 AM »
Roger B  sent you another PM. Trigger Pull is about 13.5 and rate of twist about 1 in 60
" not all who wander are lost"

Offline P.Bigham

  • Full Member
  • ***
  • Posts: 241
Re: Bil Large Barrel Roller Lock and Triggers
« Reply #8 on: May 24, 2017, 04:32:12 AM »
Still available reduced price to $850 shipped lower 48
" not all who wander are lost"