Author Topic: Contemporary Ohio Rifle with Western PA influences Finished  (Read 8888 times)

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2184
  • Missouri
Contemporary Ohio Rifle with Western PA influences Finished
« on: August 13, 2017, 08:27:27 AM »
Howdy folks!  This is a rifle I built for a fella here in Missouri - my creative thoughts behind this gun were to emulate a southern Ohio style rifle with strong western Pennsylvania influences. 

The barrel is a 42", 13/16ths Colrain .40 cal, Lock is a L&R Manton, triggers are Davis small double set.  The patchbox, sideplate, toeplate, thimbles, and many of the inlays were hand made from sheet brass, the wedge escutcheons, trigger guard and buttplate were purchased.  The barrel wedges are captured.  The barrel was hand inlet.

Patchbox and sideplate engraving were influenced by original work of Thomas Allison and Samuel McCosh.  Engraving on the lock plate was inspired by an original Ketland lock I have on a rifle that had been converted to percussion.  Remaining engraving was done to try and carry a theme.  Triggers, rear sight, cock screw and most other screws were hot blued using potassium nitrate, lock plate was blued with Brownell's Oxpho blue and rubbed with fine steel wool.  The stock was stained using aqua fortis over tannic acid, and then Laurel Mountain stain after blushing the AF.  Finish is Permalyn sealer rubbed back with Behelen rubbing compound, similar to what has been often mentioned on this site by Bill Shipman and Ed Wenger.

If you are still awake after reading all of that, how about a few pictures?















































Sorry, got kinda carried away with the pics. I will be happy to try and answer any questions.   Thanks for looking! 

Curtis

« Last Edit: August 14, 2017, 03:39:31 AM by Curtis »
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline Joe Schell

  • Full Member
  • ***
  • Posts: 208
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #1 on: August 13, 2017, 10:03:35 AM »
Very neat little rifle, well done !

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1730
  • There's more than one way to skin a cat.
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #2 on: August 13, 2017, 10:08:32 AM »
Great looking rifle! I like the patch Box.

Best regards
Rolf

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6813
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #3 on: August 13, 2017, 01:41:00 PM »
Nice Curtis!  Love the moon.

dave
"The main accomplishment of modern economics is to make astrology look good."

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2222
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #4 on: August 13, 2017, 02:28:46 PM »
 Very nice work, Curtis. Fine fit and finish. Thanks for sharing.         Bob
South Carolina Lowcountry

Offline Nordnecker

  • Hero Member
  • *****
  • Posts: 1209
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #5 on: August 13, 2017, 02:40:56 PM »
Well, that's a fine lookin' piece. Nice job on the pics, too.
"I can no longer stand back and allow communist infiltration, communist indoctrination and the international communist conspiracy to sap and impurify our precious bodily fluids."- Gen Jack T. Ripper

Offline Joe S.

  • Hero Member
  • *****
  • Posts: 1958
  • the other Joe S.
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #6 on: August 13, 2017, 03:01:05 PM »
Nicely done,like the patch box and the moon as well.

n stephenson

  • Guest
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #7 on: August 13, 2017, 03:40:29 PM »
Curtis, Very Nice!! I like it!!

Offline rennikselum

  • Full Member
  • ***
  • Posts: 100
  • Jeff Rogers
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #8 on: August 13, 2017, 03:48:33 PM »
Fantastic piece Curtis! Really like everything about.

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7628
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #9 on: August 13, 2017, 04:02:05 PM »
I too like the rifle. Nice in all the right places. Was it hard to engrave that trigger?

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 17986
  • AKA TimBuckII
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #10 on: August 13, 2017, 04:33:55 PM »
 I really like that one, looks very well done. The engraving is great but all, fit and finish is too.

   Tim C.

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18819
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #11 on: August 13, 2017, 04:45:17 PM »
Really stylish, and well executed. Classy all around.
Andover, Vermont

Offline BJH

  • Hero Member
  • *****
  • Posts: 1642
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #12 on: August 13, 2017, 05:09:45 PM »
Wow seriously impressive. Your engraving fits well. Along with your artistic execution.  I was always drawn to these federal period guns. BJH
BJH

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2184
  • Missouri
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #13 on: August 13, 2017, 06:04:15 PM »
Thanks for your kind words fellas.  The trigger metal was fairly hard wich made it somewhat difficult to engrave - I chose not to anneal and re-harden.  This was my first four piece patchbox, it was fun to make and engrave, but somewhat of a pain to inlet.   :D  I forgot to mention all engraving was done with a hammer and chisel, the primary lines and much of the shading was done using a 90 degree graver.  Artwork was drawn on the object to be engraved with a pencil.  When I got a design I was happy with I cut it.  The customer requested all brass mountings and inlays.

Curtis
« Last Edit: August 13, 2017, 06:08:51 PM by Curtis »
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline SingleMalt

  • Hero Member
  • *****
  • Posts: 613
  • One day I'll be considered a good builder.
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #14 on: August 13, 2017, 06:07:53 PM »
Wow, Curtis!  It all flows together nicely.  I'm impressed.
Never drink whisky that isn't old enough to vote.

"The penalty good men pay for indifference to public affairs is to be ruled by evil men."- Plato

"The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13166
    • Mike Brooks Gunmaker
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #15 on: August 13, 2017, 07:15:30 PM »
Interesting, not many people doing stuff like this. I give you 10 points for bravery. ;)

Personally I like this gun. I plan to build a WV gun sometime in the future that is very similar...now you have stolen my thunder.... ???
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline okieboy

  • Hero Member
  • *****
  • Posts: 818
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #16 on: August 13, 2017, 07:31:48 PM »
 Lots to like on this!
 May I ask where you got the trigger guard from?
Okieboy

Offline stuart cee dub

  • Sr. Member
  • ****
  • Posts: 461
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #17 on: August 13, 2017, 09:59:29 PM »
Charming.
Too few Ohio rifles are built. Too bad too they are more comfortable to shoot than one might guess.
The trigger guards on Ohio rifles are the best ,a spot for every finger .


Offline Curtis

  • Hero Member
  • *****
  • Posts: 2184
  • Missouri
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #18 on: August 14, 2017, 04:05:13 AM »
Interesting, not many people doing stuff like this. I give you 10 points for bravery. ;)

Personally I like this gun. I plan to build a WV gun sometime in the future that is very similar...now you have stolen my thunder.... ???

Mike, let me borrow your Woo Woo stick and I can help you restore that thunder!   8)  This rifle will long be forgotten by the time you finish the WV gun....
« Last Edit: August 14, 2017, 04:06:12 AM by Curtis »
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2393
  • USAF vet 1971-1972 malmstrom afb,montana
Re: Contemporary Ohio Rifle with Western PA influences Finished
« Reply #19 on: August 14, 2017, 04:30:48 AM »
Beautiful rifle,Curtis. I have an old Ketland lock plate,always wondered what the engraving looked like before the capflash had obliterated it. Great fit and finish,I really like ol man Moon.  Best regards, Dave  8)

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2184
  • Missouri
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #20 on: August 14, 2017, 04:37:04 AM »
Lots to like on this!
 May I ask where you got the trigger guard from?

Okieboy,  many thanks!  The trigger guard and buttplate came from Muzzleloader Builder Supply.   They are made to be paired with each other and were nice, soft brass! 

Here is a link to the TG:  https://www.muzzleloaderbuilderssupply.com/mbs3cart/agora.cgi?cart_id=2918413.25900&p_id=21030&xm=on

And buttplate: https://www.muzzleloaderbuilderssupply.com/mbs3cart/agora.cgi?cart_id=2918413.25900&p_id=21040&xm=on

Curtis
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2046
Re: Contemporary Ohio Rifle with Western PA influences Finished
« Reply #21 on: August 14, 2017, 11:46:37 AM »
Good looking rifle. I like it
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13166
    • Mike Brooks Gunmaker
Re: Contemporary Ohio Rifle with Western PA influences
« Reply #22 on: August 14, 2017, 04:16:22 PM »
Interesting, not many people doing stuff like this. I give you 10 points for bravery. ;)

Personally I like this gun. I plan to build a WV gun sometime in the future that is very similar...now you have stolen my thunder.... ???

Mike, let me borrow your Woo Woo stick and I can help you restore that thunder!   8)  This rifle will long be forgotten by the time you finish the WV gun....
Thanks for that vote of confidence in my speed.... ;) You know, I used to be known as one of the fastest builders around!
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12522
Re: Contemporary Ohio Rifle with Western PA influences Finished
« Reply #23 on: August 14, 2017, 06:55:28 PM »
You'll never be able to dodge that rep Mike...

The rifle - just lovely!  I too have a Western PA rifle in queue, and always enjoy seeing contemporary examples.  This one, with its Ohio flair is nicely made.  The stock staining is perfect.
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

oakridge

  • Guest
Re: Contemporary Ohio Rifle with Western PA influences Finished
« Reply #24 on: August 14, 2017, 07:04:04 PM »
Curtis,
I don't think you mentioned the barrel finish. It looks browned and I like it. What did you use?