Author Topic: Metal wood screws  (Read 3906 times)

Offline Adrie luke

  • Sr. Member
  • ****
  • Posts: 302
Metal wood screws
« on: October 14, 2017, 07:40:20 PM »

I hope that there is anyone who can help me.
I am searching already a long time for tiny metal flat screws for my patch boxes.
I cannot buy them in the Netherlands, only brass. That is not a problem.
On Ebay I found screws, but I cannot translate the measures.
They are sold as "Miniature hardware parts pack of 100 small #2 x 1/4 flat head wood screws".
What does this mean and what is the size in mm?

I send a picture of what I have in brass. The length is 5 mm and the flat head is 3mm.
That is about what I need.
Can I buy this screws on Ebay, is it about the same size???




Offline JCKelly

  • Hero Member
  • *****
  • Posts: 1434
Re: Metal wood screws
« Reply #1 on: October 14, 2017, 08:01:39 PM »
Slightly off-topic, but originally screws to hold brass-whatevers were made of iron(steel) and not brass.

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2143
Re: Metal wood screws
« Reply #2 on: October 14, 2017, 08:09:00 PM »
I buy the majority of my steel screws from here <http://www.blacksmithbolt.com/> and for a conversion chart try here<http://www.metric-conversions.org/length/millimeters-to-inches.htm> hope this helps.
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline Adrie luke

  • Sr. Member
  • ****
  • Posts: 302
Re: Metal wood screws
« Reply #3 on: October 14, 2017, 08:29:33 PM »
Don't forget that your patchbox screws should be iron, not brass
 Robert Wolve




Offline JPK

  • Sr. Member
  • ****
  • Posts: 350
Re: Metal wood screws
« Reply #4 on: October 14, 2017, 08:46:24 PM »
A # 2 screw is .086" or 2.2 mm the length of 1/4" is 6.35 mm and the #2 screws I have the head is .155" or 3.97 mm across.
A clear conscience is usually the sign of a bad memory.

Offline wormey

  • Full Member
  • ***
  • Posts: 186
Re: Metal wood screws
« Reply #5 on: October 14, 2017, 10:31:19 PM »
Adrie, I think Track of the Wolf or Muzzleloading Builders Supply sell what you need in steel.  Send them an email inquiry.  Wormey

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2254

Offline Daryl

  • Hero Member
  • *****
  • Posts: 14970
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Elnathan

  • Hero Member
  • *****
  • Posts: 1772
Re: Metal wood screws
« Reply #8 on: October 15, 2017, 02:06:55 AM »
Looking at the conversion charts and doing a bit of math, a #2x1/4 wood screw would have a head 4.36mm in diameter, a shank 2.18mm in diameter, and be 6.35mm long.

http://www.bestmaterials.com/images/Wood-Screw-Sizes.jpg

25.4mm = 1 inch
A man can never have too much red wine, too many books, or too much ammunition -  Rudyard Kipling

Online davec2

  • Hero Member
  • *****
  • Posts: 2802
    • The Lucky Bag
Re: Metal wood screws
« Reply #9 on: October 15, 2017, 03:52:17 AM »
If steel,  #2 screws are the right size you can also get them from Brownells.com  Search for:

080-550-225WB
2 x 1/4" Wood Screws, refill pak
"No man will be a sailor who has contrivance enough to get himself into a jail; for being in a ship is being in a jail, with the chance of being drowned... a man in a jail has more room, better food, and commonly better company."
Dr. Samuel Johnson, 1780

Offline JLBSparks

  • Starting Member
  • *
  • Posts: 39
Re: Metal wood screws
« Reply #10 on: October 21, 2017, 05:19:02 PM »
JPK has the correct dimensions.

   -Joe