Author Topic: 1st attempt at a shot pouch  (Read 498 times)

Offline Brokennock

  • Starting Member
  • *
  • Posts: 30
1st attempt at a shot pouch
« on: December 06, 2017, 05:30:14 AM »
Couldn't find a thread on posting pictures so we'll see how this goes.
This is my 1st attempt at construction a shot pouch for use with my smooth rifle. I used a bag I already own as a basis for size of the bag, and for my reasoning in making the flap a little oversize. I used an old MuzzleBlasts article about an original bag as basis for my strap attachment.  I have very limited tools and more limited work space so did the best I could with what I have.
Using this pigskin from Tandy,



I came up with this,
















So the "preview" feature isn't giving me a preview and I have no idea if the pics are working so I'm going to hit post and see what happens.
I'll continue if it works.

Offline Brokennock

  • Starting Member
  • *
  • Posts: 30
Re: 1st attempt at a shot pouch
« Reply #1 on: December 06, 2017, 05:43:47 AM »
Okay, so I'll post the rest. Comments, questions, advise for next time, are all welcome. I did sew cotton mattress ticking to the strap to fight stretching.








I used that nasty Tandy "buckskin tanned" leather for the trim piece folded over the flat sewn edges at the top of the bag and flap. This was dyed with diluted Eco-Flo dye and then heavily oiled with mink oil on both sides and the outside then treated with Sno-Seal. Tandy's thinner waxed linen thread was used for all sewing except the button, their thicker thread was used there. I purposely cut the flap oversize with the intention of trimming it to final size once I saw how the bag sized out when full, the. I screwed up and trimmed the two vertical edges out of square with eachother.
Definitely some things I would/Will do differently if I do another one, but all in all, it works.
« Last Edit: December 06, 2017, 05:46:09 AM by Brokennock »

Offline Brokennock

  • Starting Member
  • *
  • Posts: 30
Re: 1st attempt at a shot pouch
« Reply #2 on: December 06, 2017, 06:01:06 AM »
Not all shown here is in the bag for every outing, things are switched out depending on what is being hunted or if just target shooting. It will all fit, tightly, but would not be usable with it all in there. Cleaning/maintainence stuff is kept to a minimum and is in the less accessible rear section, what I need to reload and shoot is all that's in the front section. Alchohol prep wipes, toothpick halves/grilling skewer ends, and a flannel patch are in the little flat front pocket.















Thanks for looking

Offline Mike from OK

  • Starting Member
  • *
  • Posts: 21
Re: 1st attempt at a shot pouch
« Reply #3 on: December 06, 2017, 06:51:01 AM »
I like it.

When you make something with your own hands you tend to be overly critical of your work. You know where each and every tiny mistake, crooked stitch, etc... is located. Most of it is stuff that no one will ever notice. Of course our own criticisms are what drive us to do better on subsequent attempts.

Thank you for sharing.

Mike

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1200
Re: 1st attempt at a shot pouch
« Reply #4 on: December 06, 2017, 06:57:19 AM »
Well done. 

Offline Brokennock

  • Starting Member
  • *
  • Posts: 30
Re: 1st attempt at a shot pouch
« Reply #5 on: December 06, 2017, 08:02:11 AM »
Thank you gentlemen.
Mike,.i completely agree, we are usually our own harshest critics.

Offline Clark B

  • Hero Member
  • *****
  • Posts: 955
  • Southern Indiana
Re: 1st attempt at a shot pouch
« Reply #6 on: December 07, 2017, 08:12:39 AM »
Looks great. I'll offer only 1 critique. Those buttonholes. Learn to sew them by hand and the overall appearance of the bag will be much upgraded. (yes I know other parts are machine stitched, but those buttonholes catch the eye fast.

And where did you find that awesome ticking.
Psalms 144

Offline Brokennock

  • Starting Member
  • *
  • Posts: 30
Re: 1st attempt at a shot pouch
« Reply #7 on: December 07, 2017, 07:21:22 PM »
Clark, not sure if you're being sarcastic, or if I should take your reply as a comliment,,,,,, nothing is machine stitched. I did use two different stitching wheels, poorly, to layout where the holes should be punched. I used closer spacing (big mistake) for the top trim piece, and, I think, the from flat pocket. Holes were punched with an awl found in an old tool box and slightly reshaped while sharpening.

I found that ticking at a Jo-Ann's fabric store many years ago. I'm calling it mattress ticking just from the best of my ability to remember. I bought it when I was buying some pillow ticking for patch material and for experimentation with fabric "shot cups."  It is much stiffer than pillow ticking, both due to being thicker and the way the stripes/color is applied, I think.
« Last Edit: December 07, 2017, 07:26:17 PM by Brokennock »

Offline Clark B

  • Hero Member
  • *****
  • Posts: 955
  • Southern Indiana
Re: 1st attempt at a shot pouch
« Reply #8 on: December 07, 2017, 08:31:05 PM »
Brokennock, in that case your hand stitching is excellent. From the pictures some of the areas look machine done. You have skill. Google up the buttonhole stitch. Pretty simple to master and makes any copy of an old styled item look even more outstanding.
« Last Edit: December 08, 2017, 12:40:03 AM by Clark B »
Psalms 144

Online ddoyle

  • Sr. Member
  • ****
  • Posts: 403
Re: 1st attempt at a shot pouch
« Reply #9 on: December 07, 2017, 09:01:44 PM »
Sure looks like alot of fun. I like the way the flap is arranged at it's bend it looks like it would keep the bag's shape and help to keep the weather out. My only critique would be that two or more tins in a bag is like carrying car keys or pocket change when hunting- might not make a difference but an ounce of prevention-------

Offline hanshi

  • Hero Member
  • *****
  • Posts: 2616
  • My passion is longrifles!
    • martialartsusa.com
Re: 1st attempt at a shot pouch
« Reply #10 on: December 07, 2017, 09:23:28 PM »
It's quality work, alright.  I like it all.
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline Brokennock

  • Starting Member
  • *
  • Posts: 30
Re: 1st attempt at a shot pouch
« Reply #11 on: December 08, 2017, 05:10:01 AM »
ddoyle, I had the same concern over multiple tins creating noise, it's part of why I made the bag just barely big enough to hold both. That and being sewn flat with no gusset makes them stay put and not rattle.

Too tight it turns out, I had a tough reload this evening when I missed a shot at a for and she only ran 15 yards further away, and the other doe and the buck she was with didn't even move off, just changed position looking where that bad sound came from. Making the bag in late September, I haven't had a chance to hit the range and practice with it.

Offline KC

  • Full Member
  • ***
  • Posts: 179
Re: 1st attempt at a shot pouch
« Reply #12 on: December 08, 2017, 05:00:12 PM »
That's a nice bag, I like it. You did a nice job on the stitching and I like the lining material, the colors look good with the leather. In fact, I like the whole kit.
K.C. Clem
Bradenton, FL

Offline Brokennock

  • Starting Member
  • *
  • Posts: 30
Re: 1st attempt at a shot pouch
« Reply #13 on: December 09, 2017, 04:51:09 AM »
Thank you KC.