Author Topic: Screw bushing mill  (Read 3613 times)

Offline runastav

  • Hero Member
  • *****
  • Posts: 1107
Screw bushing mill
« on: January 05, 2018, 04:45:40 PM »
Hi Guys! I am stocking a Shilo Sharps and made a simple mill from a screw head to mill for the bushing no need to harden use in drill press :)Use the drill as a controll when mill the hole.
Runar










« Last Edit: January 14, 2020, 02:45:20 AM by rich pierce »

Offline David R. Pennington

  • Hero Member
  • *****
  • Posts: 2885
Re: Screw bushing mill
« Reply #1 on: January 06, 2018, 05:29:42 AM »
I made similar tool to make recessed washer for Hawken type side panel for lock screw. Made one once out of a wood screw with concave recess and a tiny pilot hole that fit over a tiny pin to make bug eyes on home made wooden fishing lures.
VITA BREVIS- ARS LONGA

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2143
Re: Screw bushing mill
« Reply #2 on: January 06, 2018, 08:47:25 PM »
Very creative - necessity is the mother of invention - nice work! ;)
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline dogcreek

  • Full Member
  • ***
  • Posts: 174
Re: Screw bushing mill
« Reply #3 on: January 13, 2018, 12:42:56 AM »
Very clever, Runar.