Author Topic: Flintlock Rifle Pan Polishing Project - Chambers Siler Lock  (Read 5070 times)

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5395
Re: Flintlock Rifle Pan Polishing Project - Chambers Siler Lock
« Reply #25 on: July 26, 2018, 07:56:40 AM »
Pans are lined with gold, and occasionally platinum. It was formed and soldered in. Electroplating would not last.

 Hungry Horse

Offline redheart

  • Hero Member
  • *****
  • Posts: 592
Re: Flintlock Rifle Pan Polishing Project - Chambers Siler Lock
« Reply #26 on: July 26, 2018, 07:58:40 AM »
If I were going to go through what it takes to polish the pan on a Siler lock, I’d order the lock from Jim with the brass pan, and make it easier on myself.

  Hungry Horse
Oh man, this is a really bad week!
I'm gonna have to agree with Hungry Horse again! :o ??? :'(

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5395
Re: Flintlock Rifle Pan Polishing Project - Chambers Siler Lock
« Reply #27 on: July 26, 2018, 05:07:12 PM »
Hey Red, how does being right for a change feel?

  Hungry Horse

Offline redheart

  • Hero Member
  • *****
  • Posts: 592
Re: Flintlock Rifle Pan Polishing Project - Chambers Siler Lock
« Reply #28 on: July 26, 2018, 05:19:50 PM »
Hey Red, how does being right for a change feel?

  Hungry Horse
Pretty good! and it's so easy.
All I have to do is agree with everything you say. ;D

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5395
Re: Flintlock Rifle Pan Polishing Project - Chambers Siler Lock
« Reply #29 on: July 26, 2018, 05:30:30 PM »
Please, please, please, give this information to my wife. I’ve  been wrong for forty nine years, with little hope of any change.

  Hungry Horse

Offline redheart

  • Hero Member
  • *****
  • Posts: 592
Re: Flintlock Rifle Pan Polishing Project - Chambers Siler Lock
« Reply #30 on: July 26, 2018, 08:46:15 PM »
Please, please, please, give this information to my wife. I’ve  been wrong for forty nine years, with little hope of any change.

  Hungry Horse
You're on your own with that one! ;)

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13166
    • Mike Brooks Gunmaker
Re: Flintlock Rifle Pan Polishing Project - Chambers Siler Lock
« Reply #31 on: July 27, 2018, 04:30:33 PM »
Pans are lined with gold, and occasionally platinum. It was formed and soldered in. Electroplating would not last.

 Hungry Horse
On English guns that I have observed there were burrs raised in the pan and the gold peened into it, no solder.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?