Author Topic: Breech plug wrench  (Read 989 times)

Offline Nhgrants

  • Full Member
  • ***
  • Posts: 144
Breech plug wrench
« on: August 14, 2018, 12:44:38 AM »
I would like to make a breech plug wrench. Thinking of cutting a tapered notch in some 5/8 steel plate and
Then weld the plate to a 1 inch diameter piece of rebar for a handle.
Does anyone have photos of wrenches they have made? Anyone have any advice.
Thanks

Offline PPatch

  • Hero Member
  • *****
  • Posts: 2456
Re: Breech plug wrench
« Reply #1 on: August 14, 2018, 01:40:28 AM »
Hello Nhgrants, welcome to ALR.

Jason at Rice Rifle barrels sells both a breech plug wrench and vice adapter barrel holders - check them out at: http://ricebarrels.com/products.html

His breech plug wrench has a stem that you can fit an iron pipe on for leverage and he uses aluminum so as not to scar the barrel or breech plug. Make what you need, of course, but I thought you might enjoy seeing Jason's approach.

dave

« Last Edit: August 14, 2018, 05:23:01 PM by PPatch »
Dave Parks   /   Quis custodiet ipsos custodes?

Offline alyce-james

  • Hero Member
  • *****
  • Posts: 708
Re: Breech plug wrench
« Reply #2 on: August 14, 2018, 03:11:38 AM »
Nhgrants; Sir, I have Mr. Jason Rice's, Breech Plug Wrench and Octagon Barrel Vice Jaws. High quality products. I have used both products often in the shop. Have a great week. AJ.
Turkeyfooter