Author Topic: Barrel makers marks?  (Read 1138 times)

Offline recurve

  • Hero Member
  • *****
  • Posts: 567
Barrel makers marks?
« on: January 13, 2019, 08:19:07 PM »
If a gun is pinned into the stock how can you tell if it's swamped and who made the barrel? any photos of barrel makers marks?

Online Mike Brooks

  • Hero Member
  • *****
  • Posts: 13263
    • Mike Brooks Gunmaker
Re: Barrel makers marks?
« Reply #1 on: January 13, 2019, 09:44:22 PM »
Take the barrel out of the gun. Just take a couple measurements to see if it's swamped.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline WKevinD

  • Hero Member
  • *****
  • Posts: 1376
Re: Barrel makers marks?
« Reply #2 on: January 13, 2019, 11:14:38 PM »
If the maker has marked the barrel it is usually on the bottom flat at the breech. The makers name is usually stamped along with caliber/ twist/ style
To tell if it is swamped: look at the muzzle (from above), Look at the breech (from above), then look at the middle (from above) If any look to be different widths it's probably swamped.

Kevin
PEACE is that glorious moment in history when everyone stands around reloading.  Thomas Jefferson