Author Topic: Ambrose Lawing re-stock  (Read 4119 times)

Offline Cades Cove Fiddler

  • Hero Member
  • *****
  • Posts: 1693
Ambrose Lawing re-stock
« on: April 30, 2019, 02:18:02 AM »
... 8) 8)... after much persuasion, I finally got the owner to part with an old gun barrel he had owned for a while,...clearly marked with maker's name behind rear sight,... I will have it re-stocked to be faithful to the architecture, dimensions and overall perfect "TENNESSEE" look that the Unicoi Co. TN gunsmith is well known for,...I believe Mr. Lawing would approve, and be happy to see it completed again,.... some specs are,... length, 47",... cal. about 38,... 1" at breech,.. 7/8 at middle,.. 15/16 at muzzle (slight swamp),... will be restocked using as many old original parts as I can find,.....(last two photos are Ambrose Lawing rifles in private collections)....  regards,.... Cades Cove Fiddler 






host photos online







Online Dave Marsh

  • Hero Member
  • *****
  • Posts: 801
Re: Ambrose Lawing re-stock
« Reply #1 on: April 30, 2019, 02:42:29 AM »
Percussion or flint???

Dave
"Those who give up freedom for security deserve neither freedom nor security."
~ Benjamin Franklin

Offline Algae

  • Full Member
  • ***
  • Posts: 194
Re: Ambrose Lawing re-stock
« Reply #2 on: April 30, 2019, 03:08:12 AM »
Wish you the best of luck, can't wait to see it! :D

Al J.

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4202
Re: Ambrose Lawing re-stock
« Reply #3 on: April 30, 2019, 04:45:11 AM »
Go for it!!!

John
John Robbins

Offline Molly

  • Hero Member
  • *****
  • Posts: 1506
Re: Ambrose Lawing re-stock
« Reply #4 on: April 30, 2019, 02:46:34 PM »
Look at it this way....

The year is 1868.  Ambrose built this rifle for a good friend maybe around 1860.  The rifle was in the top floor of the owners cabin when it was burned by northern invaders.  The owner and family fled to escape the greater danger of being killed.  Upon their return some years later the found the barrel in a pile of wood and ashes.  The barrel was all that was recovered.  The owner contacts Ambrose who agrees to rebuild the rifle and can do it for half the cost of a complete new rifle. 

So, the question is, What would Ambrose do?


REBUILD IT!!

Offline Ross Dillion

  • Full Member
  • ***
  • Posts: 156
Re: Ambrose Lawing re-stock
« Reply #5 on: April 30, 2019, 05:22:45 PM »
That is so very cool!  Can’t wait to see it completed. Ambrose Lawing rifles are my favorite.

Offline Robby

  • Hero Member
  • *****
  • Posts: 2592
  • NYSSR ―
Re: Ambrose Lawing re-stock
« Reply #6 on: April 30, 2019, 05:52:27 PM »
Great project Cades!!!!!! Hope to see it finished.
Robby
molon labe
We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution. A. Lincoln

Offline Kevin

  • Sr. Member
  • ****
  • Posts: 475
Re: Ambrose Lawing re-stock
« Reply #7 on: April 30, 2019, 07:53:26 PM »
Neat acquisition.  I too will enjoy seeing the completed project.

Consider me curious, is the inside of the barrel ready to go or might it need a bit of refreshing?  Also, any indication if the muzzle was purposely coned/funneled?

Thanks for sharing,
Kevin

Online Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 992
    • Black Powder Historian
Re: Ambrose Lawing re-stock
« Reply #8 on: April 30, 2019, 10:58:28 PM »
Will you be marking it somewhere to identify yourself as the one who rebuilt it for posteritys' sake? I too am happy to see you restoring it.
I am the Lead Historian and a Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13166
    • Mike Brooks Gunmaker
Re: Ambrose Lawing re-stock
« Reply #9 on: May 01, 2019, 12:51:08 AM »
I'd see if the warrantee is still good..... ;)
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Cades Cove Fiddler

  • Hero Member
  • *****
  • Posts: 1693
Re: Ambrose Lawing re-stock
« Reply #10 on: May 01, 2019, 09:52:12 PM »
 :D :D ;)..... HaHaHa,... well Mike, I'm not gonna dig him up to find out,... !!!,.... and Kevin,... the bore is 7 lands & grooves,... still usable but after a good scrubbing is still very dark,.. she will be re-stocked, but never fired anyway... muzzle is flat, no cone,... Dave,.. I have never seen an Ambrose Lawing in flint,... believe only made caplock rifles,...And Miss Molly,... I love your stories on these old guns,... !!! ... you should write an article (fiction based on fact of course) on one of your old Tennessee rifles and entitle it,..."The old gun that DID talk",... !!!... Thanx folks and hope to post pix of this project soon,... Regards,... Cades Cove Fiddler, ..... 

Online BOB HILL

  • Hero Member
  • *****
  • Posts: 2223
Re: Ambrose Lawing re-stock
« Reply #11 on: May 02, 2019, 12:21:25 AM »
Looking forward to seeing it, Dana.
Bob
South Carolina Lowcountry

Offline Elnathan

  • Hero Member
  • *****
  • Posts: 1772
Re: Ambrose Lawing re-stock
« Reply #12 on: May 02, 2019, 03:17:18 AM »
Fiddler,

Sent you a PM about an unrelated matter.
A man can never have too much red wine, too many books, or too much ammunition -  Rudyard Kipling

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4202
Re: Ambrose Lawing re-stock
« Reply #13 on: May 02, 2019, 05:25:28 AM »
Fiddler,
I still have this rifle, attributed to Lawing.
If you need some dimensions, additional pics, whatever, just let me know.
John

http://americanlongrifles.org/forum/index.php?topic=8921.0
John Robbins

Offline Cades Cove Fiddler

  • Hero Member
  • *****
  • Posts: 1693
Re: Ambrose Lawing re-stock
« Reply #14 on: May 02, 2019, 07:02:42 AM »
 ;) ;)... thanx, John,... I've always liked that rifle,... I have another Lawing that is similar to yours in many ways,.. mine is Walnut, and no patch-box,... barrel is longer,... same tang , toeplate , lock-bolt plate and drum... I might want some more detailed pix,... this barrel will be in a tiger maple stock,...thanx for the offer and will let you know by PM,... (and if yours ever goes to wanting to move back to Tennessee, let me know...!!!)... Regards,... CCF...

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13166
    • Mike Brooks Gunmaker
Re: Ambrose Lawing re-stock
« Reply #15 on: May 02, 2019, 03:54:48 PM »
;) ;)... thanx, John,... I've always liked that rifle,... I have another Lawing that is similar to yours in many ways,.. mine is Walnut, and no patch-box,... barrel is longer,... same tang , toeplate , lock-bolt plate and drum... I might want some more detailed pix,... this barrel will be in a tiger maple stock,...thanx for the offer and will let you know by PM,... (and if yours ever goes to wanting to move back to Tennessee, let me know...!!!)... Regards,... CCF...
Are you going to forge the mounts for it?
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Cades Cove Fiddler

  • Hero Member
  • *****
  • Posts: 1693
Re: Ambrose Lawing re-stock
« Reply #16 on: May 02, 2019, 07:46:24 PM »
 ;D ;D... Mike,... will be trying to find some old original parts to use,... kinda like the butt-plate and trigger-guard that Wayne beat me to a  couple weeks ago,... will be posting on here soon to locate the hardware,... any help appreciated,.. want to go with the idea that the original stock was splintered, and a new gun was built using all the original parts,...

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1520
Re: Ambrose Lawing re-stock
« Reply #17 on: May 03, 2019, 03:54:41 PM »
Amazing that the breechplug/tang survived intact...what a great find! 

Several years ago a good friend (now sadly gone) and I were walking around the fairgrounds at Gray, Tennessee, and found an old forged rifle barrel (no breechplug) on a table for cheap. When we got home and started looking it over, we found it stamped “E B” , which we figured was Elisha Bull. I wound up trading it to Gary Brumfield, as he thought it was probably a Bull as well.

Be sure and post updates as this one comes back to life!

Greg
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline Cades Cove Fiddler

  • Hero Member
  • *****
  • Posts: 1693
Re: Ambrose Lawing re-stock
« Reply #18 on: May 04, 2019, 05:43:45 AM »
 :o :o... Greg,.. the "E B" rifle barrel was most likely by Elbert Bible, Greene & Cocke Co., Tennessee,.. he marked his barrels thataway... wonder what Gary did with it,...??? ... great iron in these old barrels,... regards,.. CCF...

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1520
Re: Ambrose Lawing re-stock
« Reply #19 on: May 05, 2019, 05:56:27 AM »
Mr. Fiddler, I believe his intention was just to add it to his collection as a study piece.  He offered to trade me a new swamped Green Mountain barrels for it...which I still have, just waiting for the right project. I’m thinking it might be used soon, as the basis of a Joseph Bogle rifle...that one just speaks to me.

Greg
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline B.Barker

  • Hero Member
  • *****
  • Posts: 1324
Re: Ambrose Lawing re-stock
« Reply #20 on: May 05, 2019, 06:19:32 AM »
Should be a neat rifle when finished. I have a wrought iron butt plate that would work if you can't find an original.

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2707
Re: Ambrose Lawing re-stock
« Reply #21 on: May 05, 2019, 03:11:07 PM »
Hey Dana
Will this old piece work? If so shoot me a P/M.


dice and coin





quarter flipper
Stop Marxism in America