Author Topic: This and that  (Read 1575 times)

Offline B.Barker

  • Hero Member
  • *****
  • Posts: 1324
This and that
« on: May 09, 2019, 06:23:15 AM »
After finishing up the rifle I've been working on some small projects. Had another order for an adjustable powder measure so I decided to make two and a couple rolled rammer tips too. Doing a little horn work to catch up on another project also.




image hosting

Offline Cades Cove Fiddler

  • Hero Member
  • *****
  • Posts: 1693
Re: This and that
« Reply #1 on: May 09, 2019, 06:25:57 PM »
 8) 8) 8)... really gettin' into that  "Baer Killr" style of engraving, Brian,... !!! ..... I like it,...!!! ... good stuff there......

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5310
  • My passion is longrifles!
    • martialartsusa.com
Re: This and that
« Reply #2 on: May 09, 2019, 09:23:58 PM »
That's very nice work!
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline aaronc

  • Hero Member
  • *****
  • Posts: 747
Re: This and that
« Reply #3 on: May 09, 2019, 11:35:16 PM »
Like it
- Aaron C
At the work bench.

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 17988
  • AKA TimBuckII
Re: This and that
« Reply #4 on: May 10, 2019, 11:01:06 AM »
 Great horn B, like everything about it, those fine lines are tough to get right.

   Tim

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1520
Re: This and that
« Reply #5 on: May 10, 2019, 05:44:44 PM »
Pretty work, Brian. You’re gonna have to have a class on making those beautiful measures.

Greg
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline B.Barker

  • Hero Member
  • *****
  • Posts: 1324
Re: This and that
« Reply #6 on: May 11, 2019, 01:28:11 AM »
Dana, the measures are where I started using this style of engraving.

Greg, maybe someday I can do a class on the measures.

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1838
    • My etsy shop
Re: This and that
« Reply #7 on: May 16, 2019, 03:03:26 PM »
Very good work

Cory