Author Topic: Ramrod tips  (Read 1526 times)

Offline WKevinD

  • Hero Member
  • *****
  • Posts: 1357
Ramrod tips
« on: June 06, 2019, 06:39:43 PM »
I have been making ramrod tips using a friends lathe and like them alot so I thought I'd share.
5/16 stock with a 1/4" hole 1" deep in one end and a 10-32 tapped hole in the other 3" long with a 1 degree taper. Since I taper all of my 3/8" ramrods to 5/16" anyway I figured this have a nice (functional) period look to any of the rifles I send out.
The picture shows one mounted, a standard 3/8" brass tip for comparison and a couple of others.

Kevin

PEACE is that glorious moment in history when everyone stands around reloading.  Thomas Jefferson

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 18819
Re: Ramrod tips
« Reply #1 on: June 06, 2019, 07:25:56 PM »
Looks real good. Such tips solve many “front lock bolt is partly in the RR hole” issues.
Andover, Vermont

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5310
  • My passion is longrifles!
    • martialartsusa.com
Re: Ramrod tips
« Reply #2 on: June 06, 2019, 10:03:34 PM »
I really like what you came up with.  Neat.
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 17987
  • AKA TimBuckII
Re: Ramrod tips
« Reply #3 on: June 06, 2019, 11:34:58 PM »
 Good look'n, are you going to sell a few?

   Tim

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1838
    • My etsy shop
Re: Ramrod tips
« Reply #4 on: June 07, 2019, 04:46:36 PM »
I really like those.  I have made a couple by using my drill press as a lathe.  Mine have not turned out as nice as yours tho.  Well done.

Cory Joe Stewart

Offline Clark Badgett

  • Hero Member
  • *****
  • Posts: 2187
  • Oklahoma
Re: Ramrod tips
« Reply #5 on: June 08, 2019, 12:54:52 AM »
Now those I could make, easily. The brazed kind haven't panned out for me just yet.
Psalms 144

Offline WKevinD

  • Hero Member
  • *****
  • Posts: 1357
Re: Ramrod tips
« Reply #6 on: June 08, 2019, 01:02:47 AM »
I tried brazed ones, mine were ugly and didn't hold up to use.
They are not difficult to make
 just a lot of steps to make something so simple.

Kevin
PEACE is that glorious moment in history when everyone stands around reloading.  Thomas Jefferson

Offline Clark Badgett

  • Hero Member
  • *****
  • Posts: 2187
  • Oklahoma
Re: Ramrod tips
« Reply #7 on: June 08, 2019, 04:19:09 AM »
I tried brazed ones, mine were ugly and didn't hold up to use.
They are not difficult to make
 just a lot of steps to make something so simple.

Kevin

Small stuff always seems to take a lot of steps on a lathe.
Psalms 144