AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: Rolf on October 14, 2010, 08:31:08 PM
-
I'm now the proud owner of 2 teaspoons of home made lead white.
This is what I plan to do:
2 teaspoons lead white
2 tablespoons of crushed eggshell (eggshells are 97% CaCO3
1 pint(500ml) raw linseed oil
Heat in a clean paint can in a sandbath to 2000C (4000F) for 30 minutes.
I plan to use a electric hotplate and do it outside.
Anything else I should do?
-
Have a fire extinguisher handy, wear gloves and an apron, and good luck.
Bill
-
Also, a lid for the can would be a very good idea! You can toss it on the can when she "goes" ;D
-
4 thousand degrees? Better stand back, way back.
Bill
-
EYE PROTECTION!!!!! :o
-
Rolf, Have you checked with these folks re shipping to Norway?? They have some great varnishes.
http://www.jamestowndistributors.com/userportal/show_product.do?pid=1687&familyName=Circa+1850+Exterior+Varnish (http://www.jamestowndistributors.com/userportal/show_product.do?pid=1687&familyName=Circa+1850+Exterior+Varnish)
-
Tim, they won't ship varnishes, oils, ect by air. Stuff like this can't be shipped as regulare mail. It has to go by land/sea transport, and that costs a fortune. But thanks for the suggestion.
Best regards
Rolfkt