AmericanLongRifles Forums

General discussion => Gun Building => Topic started by: greybeard on January 17, 2011, 11:37:27 PM

Title: Double lever triggers
Post by: greybeard on January 17, 2011, 11:37:27 PM

This set of triggers is a set I made for my light half stock
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fi1186.photobucket.com%2Falbums%2Fz378%2FBob_Reader%2Fnew%2520england%2Fsettriggers001.jpg&hash=28e3373b412839c54c5c1f9fed1b85778de667b8)
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fi1186.photobucket.com%2Falbums%2Fz378%2FBob_Reader%2Fnew%2520england%2Fsettriggers001.jpg&hash=28e3373b412839c54c5c1f9fed1b85778de667b8)
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fi1186.photobucket.com%2Falbums%2Fz378%2FBob_Reader%2Ftrig6.jpg&hash=37780bfc5ce01e5306417b12fe8b4a18a356bceb)
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fi1186.photobucket.com%2Falbums%2Fz378%2FBob_Reader%2Fsettriggers005.jpg&hash=d7e2235361716f9d0c950772f561cb0c4762a7aa)
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fi1186.photobucket.com%2Falbums%2Fz378%2FBob_Reader%2Fsettriggers003.jpg&hash=5c47f6296d9b19a0552577f87f731b12646ba6be)
This set of triggers are very crisp and snappy\Bob

Title: Re: Double lever triggers
Post by: wattlebuster on January 18, 2011, 03:11:15 AM

very nice wish I was that talented

Title: Re: Double lever triggers
Post by: smylee grouch on January 18, 2011, 03:31:13 AM

Good job, but what did you make them out of?   Gary

Title: Re: Double lever triggers
Post by: D. Taylor Sapergia on January 18, 2011, 03:41:38 AM

Really nice triggers Bob!  Just what I need for my Southern rifle project.

Title: Re: Double lever triggers
Post by: Ken G on January 18, 2011, 05:27:23 AM

Bob,
That's a dandy set of triggers.  They look like they would have plenty of thump.
Ken

Title: Re: Double lever triggers
Post by: greybeard on January 18, 2011, 06:28:09 AM

Thanks for your responses,  Gary. The whole thing is made of mild steel and all working surfaces are case hardened with extra attention paid to the bites.. Yes Ken , I don't think the main spring needs to be quite that heavy.  Thanks Taylor..  Bob