AmericanLongRifles Forums

General discussion => Contemporary Accoutrements => Topic started by: PIKELAKE on May 17, 2011, 02:56:54 AM

Title: antler powder measures
Post by: PIKELAKE on May 17, 2011, 02:56:54 AM

I have a couple of white tail sheds and would like to make a couple of measures. I'd like to know what I could use to seal the inside of the horn once I have drilled them out. This one shed has a very porous pith, you can see light thru the end. I could drill it out and plug it with wood, but I was thinking of maybe shelac or real thin glue to seal the inside. I think bees wax would be too thick. I did a search and came up empty. The piece in question is from the middle of a tine. Thanks in advance.... JZ

Title: Re: antler powder measures
Post by: tallbear on May 17, 2011, 03:13:38 AM

Moved it for you Pinelake :) :) :)

Title: Re: antler powder measures
Post by: PIKELAKE on May 17, 2011, 04:17:35 AM

Thank you Mr. Moderator for directing my post to the correct forum.  G. Hansen,  your suggestion for Krazy  Glue makes perfect sense. I knew there was a simple solution, you just have involve the right guy.      Thanks again,   JZ