AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: dlbarr on April 16, 2014, 07:43:13 PM
-
...by R.H. McCrory. Is this a worthwhile book for a "new guy" builder?
I have Dixon's book on long rifle building.
-
That was my first "how to" book because of the low price, but soon realized that I needed more "guidance" than was contained in McCrory's book. So, I bought Buchele's "Recreating the American Longrifle" and between the two was able to build a LR from a blank......in fact still have it. Then I bought the later edition of "Recreating......" by Buchele, Shumweay and Alexander. It probably wasn't necessary, but who knows. Then bought Dixon's book and learned a little more, but realized that Dixon's book didn't enumerate the building order which helped me so much after reading Buchele's book. The enumerated building order is of prime importance to a beginner.
Reading and studying all the above books was a worthwhile undertaking....how else does someone w/o the possibility of viewing originals build halfway decent LRs? The ALR and another MLing website have also widened my knowledge and it's still an ongoing process. .....Fred
-
Everything that was in Recreating the American Longrifle is in The Gunsmith of Grenville County by Peter Alexander and then some. I have Recreating the American Longrifle (my first buidling book), Dixons book, and The Gunsmith of Grenville County along with a number of others. My recommendation is to just get The Gunsmith of Grenville County along with Rifles of Colonial America and The Kentucky Rifle in its Golden Age. I would consider these the starter books for any serious builder or collector. When you are ready for some advanced building techniques, buy Gunsmithing Tips & Projects (The John Bivens articles from Rifle magazine), by Wolf Publishing Company. You will find all my recommended reading and viewing at http://www.markelliottva.com/wordpress/2011/09/recommended-reading-viewing-for-the-southern-longrifle-and-accouterment-maker/ (http://www.markelliottva.com/wordpress/2011/09/recommended-reading-viewing-for-the-southern-longrifle-and-accouterment-maker/)
-
I too would vote for The Gunsmith of Grenville County.
And yes, I get the sticker shock many experience when they see it listed in the 35-50 buck range depending on the vendor.
But consider that, at the high end, say 50 bucks, plus the cost of a pattern 10-20 more bucks against the 800-1000 dollars worth of parts and a couple hundred hours of your time to build the rifle.
70 bucks would represent no more than 7% of the cost of parts and that would drop to 2% if you figure your time is worth $10/hours (ya we work for free when working for ourselves, but it still has some value).
And if a good book saves even one mistake, then it's probably worth the cost.
-
I too would vote for The Gunsmith of Grenville County.
And yes, I get the sticker shock many experience when they see it listed in the 35-50 buck range depending on the vendor.
But consider that, at the high end, say 50 bucks, plus the cost of a pattern 10-20 more bucks against the 800-1000 dollars worth of parts and a couple hundred hours of your time to build the rifle.
70 bucks would represent no more than 7% of the cost of parts and that would drop to 2% if you figure your time is worth $10/hours (ya we work for free when working for ourselves, but it still has some value).
And if a good book saves even one mistake, then it's probably worth the cost.
I absolutely agree with you with the exception of wages. You must work faster than I can. I figure I'm getting about @3.00/hr ;D
-
Hi Dave,
It is a very worthwhile little book and very inexpensive but if you already own Dixon's book, McCrory's won't add anything. I started with it years ago because it and my first parts were all I could afford. Later I got Buchele's book, then Dixon's, and finally Alexanders. Nonetheless, McCrory's book has a special place in my heart because it was the book I used to build my first gun.
dave