AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: Willbarq on October 01, 2015, 06:51:35 AM
-
Since I am new here, I wondered how many of you happen to be in Ohio and build? I know there are a few, but who else? Creeping along on my first build(s).
-
Willbarq
I am not in Ohio, but in Western Pa. I will be at Schoenbrunn Village Fair Oct 17 - 18, near New Philadelphia, Ohio. Stop by and visit.
Jim
-
Lots of Ohio people on here.
There is a Gun Builders Fair next weekend Oct 9th and 10th at the Log Cabin Shop in Lodi Ohio. Stop by and say hello. There will be several people working on guns and displaying items that have been built in the classes at Log Cabin.
The show is free, hours are noon to 6 on Friday and 9 to 6 on Saturday.
BillP
-
Ohio's a pretty big area.....lot's of square footage there. Where abouts are you located?
-
I'm in the mddle.
-
North Coast middle
-
Delaware here.
-
Lots of Ohio people on here.
There is a Gun Builders Fair next weekend Oct 9th and 10th at the Log Cabin Shop in Lodi Ohio. Stop by and say hello. There will be several people working on guns and displaying items that have been built in the classes at Log Cabin.
The show is free, hours are noon to 6 on Friday and 9 to 6 on Saturday.
BillP
I went so far as to figure out a route , but I can't. Finances won't allow it.
-
Ohio's a pretty big area.....lot's of square footage there. Where abouts are you located?
I'm really close to Defiance! I am thinking they should rename the city "Fort Defiance" just like "Fort Wayne"
-
I'm just over in Fremont (Ohio)
Would be glad to help.
Give me a call any time;
419-680-5442
Steve
-
good tips on swamped barrel inlet would be appreciated. Seems to be good tutorials on straight but not a swamped. I need to look further here however.
-
Delivered, in Fremont, does excellent work.
-
Wilbarq, I am a very long way from Ohio, but I did a tutorial some years ago that I could send you a link to.
I bet it would help.
e-mail me and I send you the link.
Steve Zihn
-
I'm in Ohio, about halfway between Columbus and Cleveland, and have a well equipted shop, and available if you need any help. We all started somewhere building rifles, and if it were not for others already in this field, we would not have gone very far...Here is a link to my blog...thanks...Dan
http://dfruthflintlocker.blogspot.com/
-
Ron
Thanks for the complement :)
Still have and use the nice little Q-maple mallet you gave me back many years ago at Conner Prairie.
I always remember were it came from!
Thanks
-
good tips on swamped barrel inlet would be appreciated. Seems to be good tutorials on straight but not a swamped. I need to look further here however.
Send the stock and barrel to someone who does this kind of work. It is money well spent! ;)
David
-
I'm just over in Fremont (Ohio)
Would be glad to help.
Give me a call any time;
419-680-5442
Steve
Thank you.
-
Wilbarq, I am a very long way from Ohio, but I did a tutorial some years ago that I could send you a link to.
I bet it would help.
e-mail me and I send you the link.
Steve Zihn
I think I found it! thanks
-
I'm in Ohio, about halfway between Columbus and Cleveland, and have a well equipted shop, and available if you need any help. We all started somewhere building rifles, and if it were not for others already in this field, we would not have gone very far...Here is a link to my blog...thanks...Dan
http://dfruthflintlocker.blogspot.com/
I'll be checking it out. :)
-
good tips on swamped barrel inlet would be appreciated. Seems to be good tutorials on straight but not a swamped. I need to look further here however.
Send the stock and barrel to someone who does this kind of work. It is money well spent! ;)
David
I prepared an extra blank for fudge up. Gonna try on that. Saving the nicer piece for a second gun.
-
I'm in Ohio, about halfway between Columbus and Cleveland, and have a well equipted shop, and available if you need any help. We all started somewhere building rifles, and if it were not for others already in this field, we would not have gone very far...Here is a link to my blog...thanks...Dan
http://dfruthflintlocker.blogspot.com/
I just wanted to say--this put a smile on my face. A very kind and welcoming offer! It was a similar offer from Gaeckle that got me into this hobby and it's great to see that that spirit is still around! Kudos.
-
oh- and I'm in ohio, quite close to the Log Cabin. ;)
-
oh- and I'm in ohio, quite close to the Log Cabin. ;)
Hey, so am I!
Hope to see you this weekend Dan.....Trades Fair is going on.....
-
Pataskala, Ohio
-
Thanks for all the nice replies. Fremont seems to be as close as I get.
-
Sz I would be very interested in your tutorial also. If you don't mind. There are so many members here. That can do so much an be able to show us pilgrims how to do it. Thanks to all. Being from Northern Michigan theres not even a blackpowder shop anywhere. Envy those that have a shop nearby.
-
The offer in Fremont is still open!
Just give me a call when you want to come over.
I will be at the "Gun Show" in Fremont at the fair grounds this weekend.
Good excuse to go to a gun show!!!
Stop by and say Hi.
-
I'm recently relocated to South east Ohio. Spent years in Fremont and still own a home in Gibsonburg.