AmericanLongRifles Forums

General discussion => Gun Building => Topic started by: Ionian on April 21, 2009, 01:15:46 AM

Title: Frizen spring thread size ??
Post by: Ionian on April 21, 2009, 01:15:46 AM

 I have an L&R lock I am polishing and I need to replace the screw that holds the frizen spring in place. The frizen was taped at an angle and they bent the screw when it was installed at the factory. I will open up the hole in the plate a little, but I want to replace the screw. Does anyone know what the thread count is? I know it's a 6 size screw but it's finer then 32 threads per inch.

                                                                  Thanks!

                                                                                  Nick T.

Title: Re: Frizen spring thread size ??
Post by: northmn on April 21, 2009, 01:27:08 AM

6X40

DP

Title: Re: Frizen spring thread size ??
Post by: rich pierce on April 21, 2009, 02:50:47 AM

agree

Title: Re: Frizen spring thread size ??
Post by: Ionian on April 21, 2009, 03:55:04 AM

Thank you.