AmericanLongRifles Forums

General discussion => Gun Building => Topic started by: B.Barker on June 30, 2018, 05:24:42 AM

Title: Screws
Post by: B.Barker on June 30, 2018, 05:24:42 AM

What's the name of the place online to get unplated wood screws? I usually make my own if its just a odd ball or need one I don't have. However I'm running short on my old supply and need to get some new ones.

Title: Re: Screws
Post by: draken on June 30, 2018, 05:37:06 AM

If You are looking for oval head screws you might try Muzzleloader Building Supply.  I've been buying them from Ron for several years.

Title: Re: Screws
Post by: heinz on June 30, 2018, 05:42:01 AM

I get mine from Log Cabin Gunshop in Lodi Ohio,  High quality steel and take finish well.
https://www.logcabinshop.com

Title: Re: Screws
Post by: smallpatch on June 30, 2018, 05:55:49 AM

If you need quantities,...... Blacksmith Bolt.

Title: Re: Screws
Post by: stubshaft on June 30, 2018, 07:38:27 AM

Quote from: draken on June 30, 2018, 05:37:06 AM

If You are looking for oval head screws you might try Muzzleloader Building Supply.  I've been buying them from Ron for several years.

I just ordered some screws from MBSS yesterday.  Good prices fast shipping.

Title: Re: Screws
Post by: smylee grouch on June 30, 2018, 08:01:11 AM

I too have got them from Ryan at MLBS and I think Brownells also.

Title: Re: Screws
Post by: Ky-Flinter on June 30, 2018, 04:43:07 PM

I buy plated ones from the hardware store so I can see the size and slot width in person.  Soak them in Ty-D-Bol for about a minute to remove the plating.

-Ron

Title: Re: Screws
Post by: David Rase on June 30, 2018, 04:51:58 PM

Quote from: smallpatch on June 30, 2018, 05:55:49 AM

If you need quantities,...... Blacksmith Bolt.

Ditto what Dane said. 
http://www.blacksmithbolt.com/
David

Title: Re: Screws
Post by: Maalsral on June 30, 2018, 06:06:16 PM

Brownell’s

Title: Re: Screws
Post by: T*O*F on June 30, 2018, 07:16:10 PM

Jack Garner has them out the wazoo.  All sizes and inexpensive.

Title: Re: Screws
Post by: B.Barker on July 01, 2018, 05:11:46 AM

Thanks guys.