AmericanLongRifles Forums

General discussion => Gun Building => Topic started by: Jim Curlee on March 16, 2020, 05:37:47 PM

Title: lock identification
Post by: Jim Curlee on March 16, 2020, 05:37:47 PM

(https://i.ibb.co/cvRq7b5/2020-0315kathys0001.jpg) (https://ibb.co/4fCk5sy)

Can anybody tell me who made this lock?
No it did not come to me all polished up, I'm the one that screwed that job up. LOL
The fly from this lock will work in my broken lock.

(https://i.ibb.co/MCw6N9W/2020-0315kathys0002.jpg) (https://ibb.co/S3YrvJW)

Thanks
A very frustrated Jim

Title: Re: lock identification
Post by: rich pierce on March 16, 2020, 05:52:29 PM

It is a Siler model by appearance. Chambers sells many but there are other makers who also use that pattern.

Title: Re: lock identification
Post by: Justin Urbantas on March 16, 2020, 05:55:15 PM

looks like a large Siler to me

Title: Re: lock identification
Post by: flinchrocket on March 16, 2020, 06:00:50 PM

That is a Siler,it was assembled by Chambers.You can tell by the tumbler screw.The lock kits come with the flat head looking tumbler screw.

Title: Re: lock identification
Post by: Jim Curlee on March 16, 2020, 07:09:56 PM

Thanks guy's.
Jim