AmericanLongRifles Forums
General discussion => Antique Accoutrements => Topic started by: Pukka Bundook on June 10, 2020, 04:08:59 PM
-
I know what it is, but wonder who else has seen one of these. Been in the family forever.
(You can see a real rough "HARE" scratched on it.)
Best,
Richard.
(https://i.ibb.co/d6XnZk1/DSCN3316.jpg) (https://ibb.co/7VB7hr8)
(https://i.ibb.co/9vMQXQW/DSCN3317.jpg) (https://ibb.co/597bDbL)
(https://i.ibb.co/NnJQjFz/DSCN3318.jpg) (https://ibb.co/M5tWVgL)
(https://i.ibb.co/kyq9m6P/DSCN3319.jpg) (https://ibb.co/z5P76Ht)
(https://i.ibb.co/265FygD/DSCN3320.jpg) (https://ibb.co/7zbSX2w)
(https://i.ibb.co/xHYc2Vp/DSCN3321.jpg) (https://ibb.co/m80YRQL)
(https://i.ibb.co/g6MCKVK/DSCN3340.jpg) (https://ibb.co/7bJFm4m)
-
Looks too heavy to be a hide scraper or leather working tool so I’m stumped.
-
Mill stone dressing hammer.
Best guess.
TCA
-
Mill stone dressing hammer.
Best guess.
TCA
I second Tim's best guess. Or a stone Mason's pick hammer.
Dennis
-
Tim and Dennis,
You are both right on the money!
My grandfather used it last. We had some big (5 foot) millstones and he'd re-cut the grooves once in a while. he had a good lot of the steel chisel parts, and we brought a few over here with us.
When dressing the quartz, he wore goggles made of fine wire mesh.
V smart folks on this forum!
Best regards,
Richard.
-
When I worked for the State of Florida as a conservator, I was visited 2 or 3 times by an older gentleman that was a mill stone dresser. His name was Jim Welch and he traveled around the country dressing mill stones at active mills and others that he worked to restore. I remember that he told me if the meal is coming off the stones too hot, then the stones need to be dressed. James Levy
-
That is a real treasure, one of those "find another!" kind of relics of which most have long since vanished.