AmericanLongRifles Forums

General discussion => Gun Building => Topic started by: Eric Smith on October 07, 2020, 10:14:10 PM

Title: Drills for 12" barrel pistol ramrod drills
Post by: Eric Smith on October 07, 2020, 10:14:10 PM

Where can I find drills for pistol ramrod holes? needs to be at least 13 " to be able to use chuck, I would think. Never made a pistol.

Title: Re: Drills for 12" barrel pistol ramrod drills
Post by: rmnc3r on October 07, 2020, 10:51:18 PM

Bell Hanger Drill Bits

I have these
https://www.harborfreight.com/516-in-38-in-716-in-25-in-long-wood-bit-set-3-pc-68823.html

You can get these in 1/4" too, elsewhere
https://www.homedepot.com/p/Milwaukee-1-4-in-x-18-in-Steel-Bell-Hanger-Bit-48-13-7225/202256107

Title: Re: Drills for 12" barrel pistol ramrod drills
Post by: alacran on October 08, 2020, 03:02:13 PM

Irwin makes 1/4, 3/8, and 1/2 inch bits that are 18 inches long. I have bought them at Lowe's, Home depot and Ace hardware.