AmericanLongRifles Forums
General discussion => Black Powder Shooting => Topic started by: Kevin on November 29, 2020, 10:49:42 PM
-
Greetings All,
I came across some new-old-stock Alcan 3/8 waxed shotgun wads (10 ga.) amongst some other stuff.
Has anyone ever made good use of such wads in conjunction with a muzzleloading smoothbore?
Many Thanks,
Kevin
-
I have used them in 12 ga. The fiber wads and over shot cards fit my bore and loaded fine. Fitting the bore is key. They are more difficult to load than the super soft circle fly ones. You may want a 5/8 or 3/4" hardwood dowel for loading. I used the 1/8 card for over shot. They made a seal unless is nicked the edge to allow air to escape. IF not the air pushed the ramrod back up.
-
Scota4570,
Thanks for sharing your M.L. experience with such wads. The word "waxed" in the description on the box made them sound like they might be questionable.
Thanks Again,
Kevin
-
The only "trouble" with the waxed wads, is the weight of them. If shooting without a choke, (which tends to separate the wads from the shot column) the heavier wads will tend to blast
through or into the shot cloud after it leaves the muzzle, and 'blow' the pattern into donuts. I have seen these results when using normal-type wad columns in muzzleloading guns without
any choke. Of course, it also happens in non-choked modern guns made around the turn of the 20th century (late 1800's).
I have one such gun, a London gun which shoots fine with simpler wad column without heavy "lubed" wads.
-
Daryl,
Thank you for the additional observations regarding these wads.
Kevin