AmericanLongRifles Forums

General discussion => Gun Building => Topic started by: Mike Lyons on September 07, 2022, 05:57:28 AM

Title: My favorite part of the build
Post by: Mike Lyons on September 07, 2022, 05:57:28 AM

I took a big layoff and finally started another build in June.  I’m attempting to base this one largely on the lion and lamb rifle but,  I’ve used a feature or two from a lot of different Christian springs rifles from the KRA disk, RCA 1 and the few I have gotten the privilege to handle. 

Chime in if you see something that needs fixed or is out of place.  I’m still rasping on it.


(https://i.ibb.co/Hn5znwT/DB01392-D-88-A1-48-EA-8493-400-D7-AD2-C2-EA.jpg) (https://ibb.co/MMFVMwk)

(https://i.ibb.co/pK28SVy/08-B0-F40-E-5-A0-F-4678-9-FCC-F2-AB4-FEA7-F0-F.jpg) (https://ibb.co/3F1qn6z)

(https://i.ibb.co/Cb14BGh/BCB4-BB2-B-1-A73-4-A3-D-982-A-759-FFD049-E22.jpg) (https://ibb.co/1rvBZW8)

(https://i.ibb.co/n01fzyG/A1-B10-FBF-812-A-4-A19-BECE-FFBBAAEEFEB0.jpg) (https://ibb.co/VNCD2G1)

(https://i.ibb.co/b22PdpL/1-A677-B21-35-F5-46-F2-94-AE-09-FBB7145-A5-C.jpg) (https://ibb.co/VQQtBXD)

(https://i.ibb.co/3Nb5BkP/C042075-E-DCD8-447-A-AC05-2-B681514-A5-E3.jpg) (https://ibb.co/KqgcFm8)

(https://i.ibb.co/Pc4LYrH/40-A347-C2-0615-4-C88-9-DE2-7-E3878-AA61-B9.jpg) (https://ibb.co/x1Gks2T)

(https://i.ibb.co/wLRN8Tm/B8-F8266-B-ACA3-4-BA5-9078-1-EE7-EA3601-F6.jpg) (https://ibb.co/6ZmRG2C)

Title: Re: My favorite part of the build
Post by: Mike Brooks on September 07, 2022, 05:01:43 PM

I'd inlet the box a little deeper.

Title: Re: My favorite part of the build
Post by: Mike Lyons on September 07, 2022, 07:18:57 PM

Quote from: Mike Brooks on September 07, 2022, 05:01:43 PM

I'd inlet the box a little deeper.

I was going to go with the original 200 year old JB Weld on top of the stock method but,  I'll take your advice.