AmericanLongRifles Forums

General discussion => Gun Building => Topic started by: Dave B on June 08, 2008, 09:38:33 AM

Title: Barrel transition to breach area
Post by: Dave B on June 08, 2008, 09:38:33 AM

I posted this on the other site but thought it would be good here as well.
Here are a couple originals for comparison with one of mine in process.
The biggest problem we face with out having originals to hold is the pictures don't give you those subtle contours. The post it strips show what you miss in the photo in regards to the actual contours.

(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv648%2FDaveB44%2FDSCN4625.jpg&hash=24fdd8313cde72936bbbfeab4e923faad6277a8c)

(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv648%2FDaveB44%2FDSCN4623.jpg&hash=4d5f0b3613f52e483dfef5c142e9c02a3c808188)

(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv648%2FDaveB44%2FDSCN4628.jpg&hash=72d5e10c61fbbadc9c555ace01b1132d8972fce7)

(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv648%2FDaveB44%2FDSCN4627.jpg&hash=05516a57c97206c7bda5140034f83aa472ff935d)

Title: Re: Barrel transition to breach area
Post by: Bentflint on June 25, 2008, 07:36:02 PM

Good idea, the sticky white things. The photo really hides that contour from the eye.

When final shaping that aria I do just what you did to your rifle. I start with a 45 to the flat and then either just soften the edge or completely round it, what ever fits the architecture of the gun best.

Title: Re: Barrel transition to breach area
Post by: FlintRock Rob on June 26, 2008, 08:02:04 AM

Dave,

You have really been opening my eyes to lots of little details lately -Thanks!

Title: Re: Barrel transition to breach area
Post by: Dave B on June 26, 2008, 09:17:27 AM

Bent flint,
The sticky things are cut up section of post it's. They stay in place long enough to get the photo but don't pull up any finish when you take them off.
Rob,
I am glad your finding this stuff helpful. I have always been a detail kind of guy and always want to know more about how things were done or see how they work. Some folks start to get that deer in the headlight look in their eyes when I get started talking details.

Title: Re: Barrel transition to breach area
Post by: FlintRock Rob on June 26, 2008, 09:26:39 AM

Dave,
I knew there was something good about you when we were making pouches in Ken Scott's workshop ;)
-some people look the same way when I get into details of photography.