AmericanLongRifles Forums

General discussion => Contemporary Accoutrements => Topic started by: Blackthorn on April 07, 2024, 07:24:14 AM

Title: My second horn
Post by: Blackthorn on April 07, 2024, 07:24:14 AM

This is my second horn.  I was going for something a bit different from my first.  Again this was a learning project.  I looked at a lot of examples and tried to incorporate a few into this horn.  The horn was much thicker than I thought such made it interesting to work.  I still have some techniques I need to perfect and details I need to pay more attention to.  My next horn is already on the bench and getting ready to be shaped.
(https://i.ibb.co/mDQ6b9X/IMG-3244.jpg) (https://ibb.co/TvzmY4b)

(https://i.ibb.co/1LbXv8x/IMG-3245.jpg) (https://ibb.co/c1x8gDd)

(https://i.ibb.co/Gn5pZBt/IMG-3246.jpg) (https://ibb.co/VJq9FrQ)

(https://i.ibb.co/72wczWX/IMG-3249.jpg) (https://ibb.co/FgSvWwK)

Title: Re: My second horn
Post by: rich pierce on April 07, 2024, 01:23:50 PM

 Very clean execution of the shaping and finishing. Not many first horns are of this quality.

Title: Re: My second horn
Post by: Bob Gerard on April 07, 2024, 08:06:44 PM

Very nice! You have great talent 👍🏻

Title: Re: My second horn
Post by: BOB HILL on April 07, 2024, 11:33:08 PM

Fine work.
Bob

Title: Re: My second horn
Post by: Blackthorn on April 08, 2024, 01:08:34 AM

Thank you gentlemen.  I appreciate the compliments. 

Title: Re: My second horn
Post by: Jeff Murray on April 08, 2024, 03:25:10 AM

Nice job carving and finishing the spout.