AmericanLongRifles Forums
General discussion => Shop Made Tools => Topic started by: bpd303 on July 04, 2024, 05:29:35 AM
-
My wife is into knives and wanted a jig to hold the forged knife blade when using the 2X72 belt grinder. So she started making one with a little help from yours truly. Here is what she came up with. She did all the layout, about all I did was some drilling & taping. Oh and donated 2 old file handles.
(https://i.ibb.co/N2WKFT0/100-2287.jpg) (https://ibb.co/QvYMJDW)
(https://i.ibb.co/6bn1qdG/100-2288.jpg) (https://ibb.co/HYFx9JR)
(https://i.ibb.co/sRLhWqk/100-2289.jpg) (https://ibb.co/fFmbDHB)
(https://i.ibb.co/gw6zLdS/100-2290-1.jpg) (https://ibb.co/TRrmx14)