AmericanLongRifles Forums
General discussion => Antique Gun Collecting => Topic started by: snapper on September 23, 2024, 08:14:43 PM
-
Has anyone seen markings like this? The numbers are not the serial number for the rifle.
I dont have the rifle. I have an opinion, but right now it is just an educated guess.
thanks
Fleener
(https://i.ibb.co/0MF3GY6/pix918625727.jpg) (https://ibb.co/k89FSqw)
(https://i.ibb.co/0MF3GY6/pix918625727.jpg) (https://ibb.co/k89FSqw)
-
I can't post pics either...
John
-
Well, I still can't post a picture. However, the muzzle has 4 J's stamped around the barrel and a number.
It is obvious that the barrel has been re rifled. I am assuming that the 4 J's are the mark of the person doing the re rifling and that the number is the new dia.
Any thoughts on this? Or who used the 4 J's as their mark?
Thanks
Fleener
-
Didn't Bill Large use 4 J's? I think it was for the first initials of his daughters. At least that is what I have been told. No idea if that is true or not.
-
Good morning
Im surprised Bob Roller hasnt sponded.
To me it has UncleBill Large all over it
Im more certain the numbers are month and year he did the work.
Bill generaly put his daughters initials on his work
Lets see if Bob rarres up and confirms
Best regards
Dave F 8) 8)
-
Good morning
Im surprised Bob Roller hasnt sponded.
To me it has UncleBill Large all over it
Im more certain the numbers are month and year he did the work.
Bill generaly put his daughters initials on his work
Lets see if Bob rarres up and confirms
Best regards
Dave F 8) 8)
I just NOW saw this and the 4 "J's"were his daughters initials.I will say that at some point in time Bill Large had that barrel and recut the rifling because of corrosion from caps and poor cleaning.He had a 10 groove N.G.Whitmore barrel to recut and I tried to get him to copy it because of the reports of Major Ned Roberts saying these barrels were unfair competition.I hope this helps.Have you tried a .451 bullet in the muzzle.Those numbers may indicate a bigger bore.Does it have a breech plug?
Bob Roller
-
Thanks for the replies.
I was wondering if Bill Large was the one that recut the rifling. I knew he used his daughter's J's some of the time as his mark. I have never seen it on the muzzle.
Interesting thought about the numbers being the month and the year. Bob, what do you think about that? It makes sense.
I am told that the muzzle measures .490, but I have no idea how accurate that is.
BOB: This was .451 fast twist bullet barrel. Do you think that Bill would of re cut the rifling to a fast twist? Or slow for round balls? I know it is just speculation. I can't get the owner to measure the rate of twist.
Thanks for the help
Fleener
-
Fleener,
Will the owner allow you to run a patch and rod down and it will give an idea as to ball or bullet.I would think Bill would recut that barrel by using the original rifling as a guide like a common muzzle loader.A dial caliper can give a rough idea as to the bore diameter.I use telescoping gauges or expandable small hole gauges but few hobbyists have these tools..you may be right,The numbers may be a date.This type of barrel was very rare in Bill's shop and many who see them today have no idea what they were when new.
Bob Roller
-
For those of you interested in fine Alexander Henry rifles, you should check out the cased Henry rifle coming up at Rock Island Auction down in Bedford, TX. https://www.rockislandauction.com/detail/4093/3297/cased-alexander-henry-halfstock-percussion-rifle.
Shelby Gallien
-
Does anyone know if this Henry sold and for how much? The lock is a 3 pin and possibly a Brazier.These rifles and similar others are like custom cars of the 1930' and built on a "Cost be !@*%&@" basis.They give us who are now alive an idea as to "what once was" in both venues of guns and cars.
Bob Roller
-
The rifle that I posted in this thread was purchased by me. The rifling twist is about 1 in 40". It is a nice rifle, and I like it. The lock in this rifle is not marked and is just like the one I purchased in September.
The one that was posted with a link to Rock Island has not sold yet. It is a very nice rifle and most likely will sell for more than I am interested in paying. Not sure that I need 3 AH rifles like this.
Fleener