AmericanLongRifles Forums
General discussion => Antique Gun Collecting => Topic started by: runastav on December 18, 2024, 03:03:05 PM
-
Hi all!
This gun have a exstrime nice stock and wery nice carving ;)
Runar
(https://i.ibb.co/p430PGK/DSCN4241.jpg) (https://ibb.co/5s5M9tj)
(https://i.ibb.co/j6sJJ7T/DSCN4239.jpg) (https://ibb.co/dWxmmnr)
(https://i.ibb.co/tsKL6Vj/DSCN4238.jpg) (https://ibb.co/r60dhD8)
(https://i.ibb.co/TKk2gYZ/DSCN4235.jpg) (https://ibb.co/7gXC1jH)
(https://i.ibb.co/4Mvwz8p/DSCN4234.jpg) (https://ibb.co/jG09myD)
(https://i.ibb.co/sVBN36s/DSCN4229.jpg) (https://ibb.co/5R7Scns)
(https://i.ibb.co/h8JGcYt/DSCN4228.jpg) (https://ibb.co/ZTpQS2k)
(https://i.ibb.co/ThgVqQG/DSCN4227.jpg) (https://ibb.co/HgHWpcy)
-
That's a very different design carved around the tang Runar!
Thank you for showing it!
Can you show us the top of the breech?
It looks like the nipple may be fitted into a high quality drum, rather than a patent breech.
also, some details would be appreciated, Calibre, barrel length and a photo of the triger guard.
Best,
R.
-
Very nice design as well. It would be quite comfortable to shoot. ;D
-
Hi, and thank you guys!
Here is more photos(Better taken outside ;)) The lock have no Bridle, but work great. Cal 50 and barrel l is 37" The gun is extrimly slim and light and the most beautiful stocking in my collection :)
Runar
(https://i.ibb.co/nQLb06V/DSCN4260.jpg) (https://ibb.co/r5wmtFL)
(https://i.ibb.co/qy5RJmw/DSCN4259.jpg) (https://ibb.co/BzNgnTR)
(https://i.ibb.co/ym9D4PB/DSCN4258.jpg) (https://ibb.co/bj0xbmR)
(https://i.ibb.co/JHVbYDF/DSCN4257.jpg) (https://ibb.co/qpK4HTF)
(https://i.ibb.co/k1zy7Jf/DSCN4256.jpg) (https://ibb.co/jRq5Nz2)
(https://i.ibb.co/ncs1Pmq/DSCN4255.jpg) (https://ibb.co/VSWCw90)
(https://i.ibb.co/6P0jfvD/DSCN4253.jpg) (https://ibb.co/bB5c8HN)
(https://i.ibb.co/S7jMkDv/DSCN4252.jpg) (https://ibb.co/KzPftcy)
(https://i.ibb.co/CzyjBGJ/DSCN4251.jpg) (https://ibb.co/1LNCZWs)
(https://i.ibb.co/RpcCV8z/DSCN4250.jpg) (https://ibb.co/4Zpj5kP)
(https://i.ibb.co/y5NWDf5/DSCN4249.jpg) (https://ibb.co/nfwzTgf)
(https://i.ibb.co/H28G8rr/DSCN4248.jpg) (https://ibb.co/X4RFRzz)
(https://i.ibb.co/X33ct2C/DSCN4247.jpg) (https://ibb.co/k99NXHS)
(https://i.ibb.co/4RVzzLQ/DSCN4246.jpg) (https://ibb.co/tpJgg6d)
(https://i.ibb.co/CwhbWPv/DSCN4245.jpg) (https://ibb.co/8m6rXY2)
(https://i.ibb.co/hgbkjbX/DSCN4244.jpg) (https://ibb.co/GdyXLys)
(https://i.ibb.co/6tM69VR/DSCN4243.jpg) (https://ibb.co/wQkDG3N)
-
Thank you for the extra photos Runar!
Lovely piece of maple!
I have one very similar fitted to an English gun.
I see the barrel has a patent breech and nicely done!
From the side, it looks very like one I have on an old wreck, where the drum is shaped to
Look like a patent breech.
(See picture)
(https://i.ibb.co/0GDrBns/DSCN0724.jpg) (https://ibb.co/rw7HbQd)
-
Runar is the gun stock wood flamed birch?
Ray
-
As Brooks would say, "Nifty"!
Al J.
-
Thank you guys! Yes the stock is Flame Birch :)
Runar