AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: runastav on May 21, 2025, 12:13:00 PM
-
Hi all! Here is a Belgisk duell pistol one of a coaple #1 where in the $#*! is #2??? Its wery nice made not one of the cheap one.
It need some TLC , first wedge keys the one side have a not original plate(Bigger) so adjusting it an glued it have no screws only small innside pins braked of.
Runar
(https://i.ibb.co/ycC5TnHM/DSCN4636.jpg) (https://ibb.co/LXy6wzVq)
(https://i.ibb.co/rGqc3zYS/DSCN4635.jpg) (https://ibb.co/QFhCkTLR)
(https://i.ibb.co/Wp217qfs/DSCN4634.jpg) (https://ibb.co/h1mvrhVC)
(https://i.ibb.co/vxfp6GLs/DSCN4633.jpg) (https://ibb.co/Fbc2LM8s)
(https://i.ibb.co/HDqHnzzP/DSCN4632.jpg) (https://ibb.co/wN4zMWWQ)
(https://i.ibb.co/tMKH2fjp/DSCN4631.jpg) (https://ibb.co/TB2w0XjM)
(https://i.ibb.co/HpM5HCzG/DSCN4629.jpg) (https://ibb.co/zHLq4FRP)
(https://i.ibb.co/BHXQXRGT/DSCN4626.jpg) (https://ibb.co/HLWbWQCG)
(https://i.ibb.co/JR4Mjy6m/DSCN4625.jpg) (https://ibb.co/bgZ852wQ)
-
That's a beautiful old pistol. Your comment about it "not being one of the cheap ones" made me think of an old Army joke. "When in combat, always remember that your weapon was made by the lowest bidder".
Roger B
-
Haha, but it works Roger B ;) Trigger idiot filing fixed and new retur spring the original was to soft. Stock have old gluing I drill a hole for a 4mm steelrod and epoxy in place.
Runar
(https://i.ibb.co/zV3Vdz8M/DSCN4638.jpg) (https://ibb.co/GQZQmqs6)
(https://i.ibb.co/LyZdjGQ/DSCN4646.jpg) (https://ibb.co/HyHTwJN)
(https://i.ibb.co/Q3D9Cy4q/DSCN4643.jpg) (https://ibb.co/G4H7tzq1)
(https://i.ibb.co/GfJwPwk0/DSCN4640.jpg) (https://ibb.co/hxM585Hy)
(https://i.ibb.co/9mfSMpfm/DSCN4637.jpg) (https://ibb.co/Psb0Srbs)
-
New screw head
Runar
(https://i.ibb.co/gZkrhGgK/DSCN4652.jpg) (https://ibb.co/k2NGvpcC)
(https://i.ibb.co/DDvktY5t/DSCN4651.jpg) (https://ibb.co/WWMF60g6)
(https://i.ibb.co/r2Mkgk6B/DSCN4650.jpg) (https://ibb.co/b5L1x1B4)
(https://i.ibb.co/TqK7VkDH/DSCN4649.jpg) (https://ibb.co/1JsPDLY9)
(https://i.ibb.co/r2DLnz9X/DSCN4648.jpg) (https://ibb.co/d483nVZH)
-
Hi all, pistol done ready for the shooting range :)
Runar
(https://i.ibb.co/cSd8642Q/DSCN4654.jpg) (https://ibb.co/W41zkmBf)
(https://i.ibb.co/GvpH0XMb/DSCN4663.jpg) (https://ibb.co/MDSBsb13)
(https://i.ibb.co/HpbXWyst/DSCN4662.jpg) (https://ibb.co/0V6QgLSC)
(https://i.ibb.co/ZRyMT0WM/DSCN4661.jpg) (https://ibb.co/4wBVNHPV)
(https://i.ibb.co/VY4FbMT5/DSCN4660.jpg) (https://ibb.co/jkXCq3Ds)
(https://i.ibb.co/XZFqZgjz/DSCN4659.jpg) (https://ibb.co/yngrn1d8)
(https://i.ibb.co/VYGBjHXw/DSCN4658.jpg) (https://ibb.co/tp6CmZyL)
(https://i.ibb.co/W4LPDkyC/DSCN4657.jpg) (https://ibb.co/pBSRWfzq)
(https://i.ibb.co/My0DcvWB/DSCN4656.jpg) (https://ibb.co/nqJs7GZP)
(https://i.ibb.co/fVwNyspF/DSCN4655.jpg) (https://ibb.co/spY1NZwR)
urlshare (https://nl.imgbb.com/)
-
You did a great job Runar. That is a beautiful pistol. Thanks for sharing all the photos.
-
Classic case of “one of a pair mysteriously vanishes into the 1800s void.” Somewhere out there, #2 is sitting in a dusty attic wondering what happened to its sibling