AmericanLongRifles Forums

General discussion => Tutorials => Gunmaking tools and techniques- metal shaping => Topic started by: Dphariss on July 05, 2010, 06:36:12 PM

Title: DST layout
Post by: Dphariss on July 05, 2010, 06:36:12 PM

Like a lock a DST or ANY set trigger must be properly laid out to work properly.
Improperly laid out triggers can be a SAFETY HAZARD.
This is a drawing I did some years back for a magazine column I do periodically.
It is copyrighted as a result but I don't think Steve will care much.

Dan

(https://i72.photobucket.com/albums/i199/DPhariss/Gunsmithing/Settrigger.jpg)

Title: Re: DST layout
Post by: Ken G on July 05, 2010, 07:14:06 PM

Dan,
Great drawing.  I"m sure it would be very helpful to anyone trying to make a set of triggers from my tutorial.  Would you mind posting your drawings in that thread as well?  Along with any suggestions, tips or comments you think would help someone make a properly functioning set of triggers.
Thanks,
Ken