AmericanLongRifles Forums

General discussion => Tutorials => Gunmaking tools and techniques- metal shaping => Topic started by: Dphariss on July 05, 2011, 05:03:44 AM

Title: Buttplate reform
Post by: Dphariss on July 05, 2011, 05:03:44 AM
This is a R. Goehring #10
Before and after peaning to enlarge/reshape. Now 2 3/16 wide was 1 15/16
Numerous anneals and had to torch weld up one crack. Used brass sheet for fill.

Dan

(https://i72.photobucket.com/albums/i199/DPhariss/Gunsmithing/P1020282_2.jpg)

(https://i72.photobucket.com/albums/i199/DPhariss/Gunsmithing/P1020281_2.jpg)