AmericanLongRifles Forums
General discussion => Contemporary Accoutrements => Topic started by: LRB on February 27, 2013, 09:52:08 PM
-
Just finished today. Blade is 3 3/8" 01 steel. Grip is turned from European Beechwood 4" long, and about 7/8" at the butt, tapering to an 11/16" mild steel ferrule with 1/8" steel pivot pin of W-2 steel, hammer peened. Grip is finished with 3 coats of MinWax Antique Oil Finish. Hope you enjoy a look.
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fi37.photobucket.com%2Falbums%2Fe77%2Fwicklrb%2FDSCN0419640x480_zps7fd9fd90.jpg&hash=985b6cc8b233fd963a1642e416a826e91e86f119)
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fi37.photobucket.com%2Falbums%2Fe77%2Fwicklrb%2FDSCN0420640x480_zpsc0ee6bea.jpg&hash=db7d9f469b81b828735ebad978a807243cb704a2)
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fi37.photobucket.com%2Falbums%2Fe77%2Fwicklrb%2FDSCN0418640x480_zpsd24fa216.jpg&hash=89beeb23d46dfc4a3aed6e5a9006d82cd4227efc)
-
A pretty penny for sure, Really neat.
Tim C.
-
Great work as always Wick.I really like this one :) :)
Mitch Yates
-
Very nice. Now I want a lathe...
I am presuming that the rivet is tight enough that the blade cannot swivel freely. How thick is the bolster?
-
Yes on the rivet, but as they break in, the rivet most often requires a smack or two with a hammer to re-tighten. The ferrule is about 1/32" thick.
-
Thanks.
-
Cool little knife Wick!
-
We need a Penny Knife Tutorial!