AmericanLongRifles Forums
General discussion => Black Powder Shooting => Topic started by: crankshaft on January 11, 2016, 09:48:09 PM
-
I have several Siler flintlocks; from Jim, bought elsewhere, and a kit I put together, ( after replacing a few innerds).
But I have no knowledge or experience with the small flint Silar, except percussion. Is it as fast as the large flint? I plan to eventually make a target rifle, kinda southern style. Thoughts? Experience? thank you...
-
Having used several of Jim,s locks I think the small Siler is faster
-
Small Siler flints are really fast .My recollection is several people on this board have posted testing results on these and this was the quickest .
One of the best off hand target shooters I know has a rifle that has the small siler flinter on his money gun.
Maybe it is because being smaller there is simply less movement until the flint meets the frizzen .
-
Lots of target shooters here have the small siler rather than the large. It is a great lock.
-
The small Siler on my .36 skwerl rifle is really fast; I can attest to that one.
-
The small Siler is very fast and dependable.
-
Using the Chambers' Small Siler flint lock, I get better ignition and flint life by inserting a tumbler made for the large deluxe Siler and using a larger flint. Great lock.
-
I'm getting close to having one with the tumbler mod ready to try. Just have to finish the rifle. Supposed to have a bit longer throw, and you don't need the small flints. We'll see if it is so before too long.
-
I lengthened the sear on my small siler to get a longer throw.
Turtle
-
For the past several years we have been using the deluxe or golden age tumbler in all of the small Siler locks we build. It has a longer distance to the half cock position which makes using a longer or more standard size flint possible. The standard small Siler tumbler required a very short flint in order to have the lock at half cock and the frizzen closed. Most of the small Siler flintlocks we sell are assembled by Bud Siler himself. Bud has been working for us building the small flintlocks for a number of years.
-
With a hacksaw, a file and about half an hour or less of time you could make one of our gunmaker's locks into the mountain style fairly easily. Just a thought.