AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: smallpatch on March 27, 2017, 02:50:20 AM
-
Hi gang,
I bought this several years ago, and just can't remember who I got it from.
I need a new collar and pin for a #29 bit.
That's the little piece at the top.
Any help out there?
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fpreview.ibb.co%2FnPEgAa%2FIMG_0688.jpg&hash=cba71d1893f63f183ac57e3c9690fd44c439f0a3) (http://ibb.co/mzM6bF)
cloud hosting images (http://imgbb.com/)
-
It's made by Tom Snyder. Sorry but I dont have any contact info. He is on here occasionally so try a PM.
Good luck
Kevin
-
About 1 year ago this was a good email address for Tom
tpsnyder@mtu.edu
-
Thanks guys, I believe you're right. I'll see if I can get ahold of him.
-
Slap my face and call me silly, but how does this thing work? Is it used for cross pins?
Don't shoot yore eye out, kid
The Capgun Kid
-
Capgun, You put the little point where you want the drill to come out and, drill through the bushing. I find mine helpful for hitting an existing hole like a sideplate to lock bolt hole or, a tang to trigger plate hole . Kind of like connect the dots. Just my 2 cents. Nathan