AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: Shovelbuck on August 10, 2017, 01:18:41 AM
-
Does anybody offer one for sale or do I need to make my own?
-
Make your own, that's much more fun and rewarding. To answer your question I don't have any idea if they are sold or not.
dave
-
Make your own. It takes less than 5 minutes to cut it out using a jewelers saw. Plus as Dave says, it is more rewarding as you will know YOU made the part, not someone else. I found years ago that purchased inlays are never quite the right size you need.
-
Here is a pattern I have used, it will get you started, just reduce it to the size you want.
Tim C.
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fpreview.ibb.co%2Fmdf4uv%2F003.jpg&hash=1187f275aa74f4a73106957e22e76ad4ca345820) (http://ibb.co/d2QF1a)
-
Thanks!