AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: Adrie luke on October 14, 2017, 07:40:20 PM
-
I hope that there is anyone who can help me.
I am searching already a long time for tiny metal flat screws for my patch boxes.
I cannot buy them in the Netherlands, only brass. That is not a problem.
On Ebay I found screws, but I cannot translate the measures.
They are sold as "Miniature hardware parts pack of 100 small #2 x 1/4 flat head wood screws".
What does this mean and what is the size in mm?
I send a picture of what I have in brass. The length is 5 mm and the flat head is 3mm.
That is about what I need.
Can I buy this screws on Ebay, is it about the same size???
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fpreview.ibb.co%2FeMdYbG%2FP1010750.jpg&hash=6f9389524bacad4be866c2ff5d72f238f0dfba32) (http://ibb.co/gdoAOw)
-
Slightly off-topic, but originally screws to hold brass-whatevers were made of iron(steel) and not brass.
-
I buy the majority of my steel screws from here <http://www.blacksmithbolt.com/> and for a conversion chart try here<http://www.metric-conversions.org/length/millimeters-to-inches.htm> hope this helps.
-
Don't forget that your patchbox screws should be iron, not brass
Robert Wolve
(https://americanlongrifles.org/forum/proxy.php?request=http%3A%2F%2Fpreview.ibb.co%2FnrhvOw%2FP1010738.jpg&hash=d52d7970e60dffb7f78699aa1e8ba473ff48dbbd) (http://ibb.co/kJ6N3w)
-
A # 2 screw is .086" or 2.2 mm the length of 1/4" is 6.35 mm and the #2 screws I have the head is .155" or 3.97 mm across.
-
Adrie, I think Track of the Wolf or Muzzleloading Builders Supply sell what you need in steel. Send them an email inquiry. Wormey
-
http://www.blacksmithbolt.com/store/c/225-2-Slotted-Oval-Head-Wood-Screws.aspx
-
Here is a source, Andrie.
https://www.trackofthewolf.com/List/Item.aspx/855/2
or this:
https://www.trackofthewolf.com/Categories/PartDetail.aspx/855/2/SCREW-1X14-O-PACK
-
Looking at the conversion charts and doing a bit of math, a #2x1/4 wood screw would have a head 4.36mm in diameter, a shank 2.18mm in diameter, and be 6.35mm long.
http://www.bestmaterials.com/images/Wood-Screw-Sizes.jpg
25.4mm = 1 inch
-
If steel, #2 screws are the right size you can also get them from Brownells.com Search for:
080-550-225WB
2 x 1/4" Wood Screws, refill pak
-
JPK has the correct dimensions.
-Joe