AmericanLongRifles Forums
General discussion => Contemporary Longrifle Collecting => Topic started by: blaster12 on June 15, 2018, 07:24:27 AM
-
Hello, new to the forum. Anyone have experience with the Pedersoli Indian Trade Gun? (It's a .62 cal. smoothbore in the Northwest trade gun style.) Currently listed for $995 at Dixie Gun Works. Not interested in building something--too little time or space (apartment dweller). Would use it as a range toy, for the occasional woods walk, and for small game hunting. Thanks, guys.
PS: Historical accuracy is not my primary concern; just looking for first-hand experiences with this particular gun concerning its function/reliability.
-
Generally, Pedersoli flintlocks aren't noted for their lock reliability.
-
Mike, thanks for the input. Is this from experience?
-
Mike, thanks for the input. Is this from experience?
No. It's from watching others struggle to get them to go off.
-
I have no experience with him or his weapons but you should contact Jackie Brown on this site or post a "want to buy" add in the classified section.
Kevin
-
At this time I'm not looking to spend the money or wait for a custom build. FYI: I own a Pedersoli Pennsylvania flintlock rifle that works just fine. (I know it's not period correct and all that but I like it.) I'd like to add a smoothbore to my collection for the reasons mentioned.
The Indian Trade gun they sell has a different lock from my Penn. so I was hoping to hear from folks who have owned or fired that particular model. Shooting muzzleloaders is a side hobby for me--I primarily shoot modern handguns and rifles so I'm not looking to make a huge investment. Just looking for a gun that works, can buy now, won't cost a fortune, and will see occasional use. On paper the Pedersoli Indian Trade gun fits the bill. Hoping to hear opinions/reviews on it. Thanks guys.
-
Blaster12,.... check PM.
-
Sold my Pedersoli Trade gun, wish I had it back
Too late realized my lock problems had to do with flint position, in my case bevel up did not work so well as did bevel down.
Anyway if you get one & it is not firing reliably, or as in my case eating up flints every three shots, pay a lot of attention to lock geometry. How flint is installed is very important, maybe size also.
The good news is Pedersoli use real, honest gun barrel quality steel for their barrels. None - none - of our blessed American makers use anything but free-machining screw stock, or at best, some unspecified variation of 1137 (high sulphur, free machining)
This can make a difference should you be one of those people - i.e. any human - who might make an error in loading.
-
Generally, Pedersoli flintlocks aren't noted for their lock reliability.
I agree totally with Mike. Pedersoli guns generally work O.K., but their flintlocks are a krap shoot. I've tuned up 7 0r 8 0f them to make them shoot most of the time, however I was never totally happy with them. I've never worked on their Trade Gun lock, just the rifle, pistol and Brown Bess locks. If you want first hand info, try the Traditional Muzzleloading Forum, they go in more for the Italian knock offs than ALR guys do. Just Sayin.
-
I've never had any problems with the one on my Mortimer shotgun.
-
The Mortimer flintlock is a well designed and made lock. It is a good performer, as has already been mentioned.
-
Look up "Black Powder Maniac Shooter" on y-tube. He has used a Pedersoli kY flint rifle for around 5 or six years. His goes off reliably. He recently has been using a Pedersoli Trade gun 62/20ga. It seems to do ok also but he uses a very fine priming powder.
I had a Blue Ridge Pedersoli in the early 2000's It was finicky with the patent breech communication hole being too small for 2f power but worked well for 3F if you made sure the powder was making the trip to the touch hole. The Pedersoli will do fine for what you describe. You may or may not have to do some tuning.
Bob
-
Blaster....... Jackie Brown has Trade rifles that he builds and sells here on this site. He mostly uses good parts and his prices are hard to beat. They run in the $900 range and you will have a well made very shootable gun.
Kind Regards
Frank Barker